Dorset · England
Bath Re-enamelling for Corfe Mullen homes
Fixed-price bath re-enamelling in Corfe Mullen and the surrounding area, usually in one visit.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
Repair or replace in Corfe Mullen?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. We charge the same wherever you are, so there is no premium for Corfe Mullen. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- A fixed quote before you book
- Honest advice, even when it means no job
- Most jobs done in one visit
- We come to you, anywhere in the UK
See our full price list and guide to resurfacing and replacement costs.
Bath re-enamelling at your home in Corfe Mullen
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Typical jobs include an old resurfacing that’s failing and an outdated colour you’d like to change, across pressed steel baths, acrylic baths and cast iron baths.
All our work comes with our one-year guarantee.
- Area
- Corfe Mullen (BH21, BH18)
- Area hub
- Dorset
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Corfe Mullen
Corfe Mullen is about 3 miles south-west of Wimborne Minster, in Dorset. From the centre of Corfe Mullen to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Corfe Mullen is one of 462 towns and villages in Dorset we cover.
All of BH21 and BH18 is covered, from the main roads to the quietest streets. Whether you live on Henbury Rise, Henbury Close and Laurel Close or anywhere nearby, we can come to you. We also cover the places around Corfe Mullen: Ashington (1 mile north-east), Beacon Hill (2 miles south-west), Creekmoor (2 miles south), Cowgrove (2 miles north) and Henbury (2 miles north-west). Further out, we also cover Christchurch (12 miles east), Wimborne Minster (3 miles north-east), Blandford Forum (9 miles north-west), Verwood (10 miles north-east), Ferndown (6 miles north-east) and Swanage (11 miles south).
Around Corfe Mullen
We visit homes around Pocket Park, Castle Court Preparatory School and St Nicholas. You will also find Rushcombe First School (within half a mile south-east) and Corfe Hills School (0.5 miles east). The closest station to Corfe Mullen is Hamworthy station, about 3.1 miles south of the centre. Well-known places in the area include Dolphin Shopping Centre (3.9 miles south-east) and Alderney Hospital (3.6 miles south-east). The countryside around Corfe Mullen includes Ham Common (LNR) and Stoney Down.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Clean with a soft cloth and mild detergent
- Keep toiletries on a shelf rather than in the bath
- Do not let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Corfe Mullen questions
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Do you cover Corfe Mullen?
Yes, we do. We send a technician to Corfe Mullen for every job, and the price is the same as everywhere else.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so let us know about it.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How long will the bath be out of use?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Common problems we fix in Corfe Mullen
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted:
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
What your quote should include
- Who will actually do the work
- Whether the colour is mixed to match
- How to look after the finish
- How soon you can use it again
Places near Corfe Mullen
Other services in Corfe Mullen
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which typically takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the following day.
How to prepare
- Have a window or extractor fan available
- Keep a parking space free if you can
- Let us know which floor the room is on
Get a quote
Upload pictures of the damage and one of the whole item, and tell us you’re in Corfe Mullen, and we’ll come back with a fixed quote.
Read more
Work for landlords and builders
Landlords, letting agents and housing providers in Corfe Mullen use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
When we would advise against a repair
It helps to know what we cannot do:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Access to the area
- What kind of damage it is
- What the surface is made of
- The size and number of damaged areas
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- What it’s made of, if you know
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
- A close-up of the damage, in focus
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
