Kent · England

Bath Re-enamelling for Ide Hill homes

Fixed-price bath re-enamelling in Ide Hill and the surrounding area, typically in one visit and guaranteed for a year.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Ide Hill

When a repair is not the answer

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Steel that has corroded right through
  • An acrylic bath that flexes badly underfoot
  • Leaks from fittings rather than the bath

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Ide Hill

  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths

Bath re-enamelling in Ide Hill without replacing anything

If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. If you are dealing with an outdated colour you’d like to change and stains that won’t shift, we can help.

Whatever the size of the job, it’s backed by a one-year guarantee in Ide Hill and across Kent.

Where
Ide Hill (TN14)
County
Kent
Cover
A year, on every repair
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Keeping it looking good

So the finish stays in good condition for years:

  • Keep toiletries on a shelf rather than in the bath
  • Repair dripping taps early
  • Avoid suction-cup mats
  • Do not use the bath until it has fully cured

The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

What affects the price in Ide Hill

Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:

  • Doing more than one item at once
  • How many areas need work
  • The type of damage
  • Access to the area

Our prices are the same across the UK, so there’s no premium for Ide Hill. The job itself decides the price: the material, the amount of damage and how many items.

How to get a fixed price

You can take the photos on your phone. Just make sure we can see:

  • Something in shot to show the size
  • Details of any past repairs
  • One sharp close-up of the damage
  • The material, if you know it

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed price, not an estimate.

Do you need bath re-enamelling in Ide Hill?

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

Common reasons people in Ide Hill contact us include:

  • A coating lifting around the plughole
  • Enamel that is lost its shine and feels rough
  • Chips and rust in more than one place
  • Wear marks under the taps

What to look for in a quote

  • Whether they match the colour on site
  • The length of the guarantee and what it covers
  • How changes to the job are handled
  • Is the price fixed, and does it include VAT?

Choosing a repair company

Ide Hill: your questions answered

Is it safe with children and pets around?

Just keep them out of the work area. We will tell you when the room can be used again.

What areas do you cover?

Across the UK. Prices don’t change with location.

Will the price change on the day?

The price is fixed for what the photos show. If there is more, we will tell you before starting.

Do you cover Ide Hill?

Yes, we do. Technicians travel to Ide Hill from across the region, with no extra charge for travel.

How much does bath re-enamelling cost in Ide Hill?

Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item with your TN14 postcode.

How durable is a resurfaced bath?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do you charge for travel?

There is no separate call-out charge. The fixed price covers the visit and the work.

Ide Hill and the surrounding area

Ide Hill is about 3 miles south-west of Sevenoaks, in Kent. Whether you’re in the middle of Ide Hill or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Ide Hill is one of 922 places in Kent we cover. Our jobs stretch from Ide Hill to London (about 20 miles away).

Every address in TN14 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Hanging Bank and Camberwell Lane and the roads around them. Main roads around Ide Hill include the B2042, which makes travel easy. Other places close to Ide Hill include Goathurst Common (1 mile north-east), Toy's Hill (1 mile west), Brasted Chart (2 miles north-west), Sundridge (2 miles north) and Brasted (2 miles north-west). Further out, we also cover Dartford (14 miles north), Sevenoaks (3 miles north-east), Royal Tunbridge Wells (10 miles south-east), Tonbridge (7 miles south-east), Swanley (11 miles north) and Kings Hill (12 miles east).

Around Ide Hill

Typical jobs here are in homes near Church of St Mary at South End of Village Green, Ide Hill Church of England Primary School and Stubbs Wood Country Park and the streets around them. The nearest railway station is Sevenoaks station, roughly 3.1 miles north-east. Well-known places in the area include Sevenoaks Museum (3.3 miles north-east) and Sevenoaks Hospital (4.1 miles north-east). For a walk, there is Dryhill Nature Reserve and Betsom's Hill.

Map of Ide Hill © OpenStreetMap contributors

Materials and what they mean for the repair

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

How the visit works

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes most of the day. We clean up when we’re done and let you know when you can use it again.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Getting ready for the visit

  • Make sure the area is dry
  • Let us know which floor the room is on
  • Have a window or extractor fan available

Get a quote

Most clients in Ide Hill get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Get a free quote

Read more

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Landlord and trade work in Ide Hill

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.