Derbyshire · England
Bath Re-enamelling for Inkersall homes
Fixed-price bath re-enamelling in Inkersall and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A dull, rough surface that won’t come clean
Bath re-enamelling in Inkersall, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on Victorian roll-tops, acrylic baths and pressed steel baths, and common reasons people contact us are an old resurfacing that’s failing and a bath that stays dull however much you clean it.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Inkersall (S43)
- County
- Derbyshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
To be straight with you, there are a few things a repair will not fix:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Inkersall
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Inkersall, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Inkersall and the surrounding area
Inkersall is about 1 mile south-west of Staveley, in Derbyshire. Customers in Inkersall get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Inkersall is one of 532 places in Derbyshire we cover. You can also see our page for Manchester, about 38 miles away.
Postcode districts we cover here: S43. From Denby Road, Crich Road and Kinder Road or a nearby road, we can come to you. Neighbouring places we cover include Hollingwood (1 mile north-west), Staveley (1 mile north-east), Brimington (1 mile north-west), Calow (1 mile south-west) and Arkwright Town (1 mile south-east). Larger places within reach include Chesterfield (3 miles west), Dronfield (5 miles north-west), Ripley (14 miles south), Bolsover (4 miles east), Matlock (11 miles south-west) and Clay Cross (6 miles south).
Near you in Inkersall
Around Inkersall, we work in homes near Springwell Community School, St Columba and Inkersall Primary Academy, among other places. You’ll also find Poolsbrook Country Park (1.2 miles north-east), Miners Arms (0.8 miles south-west) and Springwell Community School (0.5 miles north-east). The nearest railway station is Chesterfield station, roughly 2.1 miles south-west of the centre. Further afield, we also cover the area around Bolsover Castle (3.5 miles south-east) and Chesterfield Royal Hospital (1.5 miles south-west).
- Parks and local facilities nearby include Municipal Borough of Chesterfield (2.2 miles south-west)
Places near Inkersall
More services for Inkersall
How to look after the repair
It’s all simple stuff:
- Dry the bath after use to stop limescale
- Do not let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
- Do not use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
What affects the price in Inkersall
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- What the surface is made of
- The colour and finish to match
- Whether we combine several jobs
- Previous DIY repairs that have to come out
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Getting a price from pictures
Most quotes are done from pictures alone. To make it quick:
- What it’s made of, if you know
- Natural light rather than flash
- Where you are, by postcode
- Details of any past repairs
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
How the visit works
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. It normally takes a full day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.
Related advice
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
FAQs for Inkersall
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What happens after I send photos?
We come back with a fixed price, plus dates. You’re under no obligation.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you redo someone else’s repair?
Normally, yes. We remove the old repair before doing a new one.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
When to call us in Inkersall
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Clients usually contact us about:
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
- Stains that will not shift
Before booking anyone
- What happens if the damage is worse than the pictures show
- If travel is included in the price
- How your room will be protected
- How the colour is matched
Repair or replace: which is better?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why book with us
- No extra charge for your area
- Colours mixed by hand to suit your surface
- Fixed prices from your pictures
- One-year guarantee on every repair
See our pricing and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
