North East Lincolnshire · England
Bath Re-enamelling for Irby upon Humber homes
Bath re-enamelling in and around Irby upon Humber: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Thin, worn enamel in places
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Irby upon Humber. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- No extra charge for your area
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- Rooms protected and left tidy
See our prices page and resurfacing vs replacement cost guide.
Bath re-enamelling in Irby upon Humber without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include thin, worn enamel in places and a peeling or bubbling previous coating, across acrylic baths, pressed steel baths and Victorian roll-tops.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Irby upon Humber (DN37)
- Area hub
- North East Lincolnshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
More services for Irby upon Humber
Signs you need bath re-enamelling in Irby upon Humber
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
People typically call us after spotting one of these:
- A coloured bath you want in white
- Worn patches where water runs and sits
- Stains that will not shift
- A peeling or bubbling previous coating
What to look for in a quote
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- If travel is included in the price
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Where we work around Irby upon Humber
Irby upon Humber is about 5 miles south-west of Grimsby, in North East Lincolnshire. Wherever you are in the DN37 postcode area, we carry out the work at your property. Irby upon Humber is one of 34 places in North East Lincolnshire we cover. Our nearest city page is Leeds, about 59 miles away.
Here we cover the DN37 postcode area. That includes homes on Church Lane, Old Main Road and School Lane. We also cover the places around Irby upon Humber: Laceby (1 mile north-east), Aylesby (2 miles north), Barnoldby le Beck (3 miles south-east), Bradley (3 miles north-east) and Healing (4 miles north). Within a short drive, we also cover Grimsby (5 miles north-east), Cleethorpes (7 miles east), Immingham (6 miles north), Yarborough (4 miles north-east), New Clee (6 miles north-east) and East Marsh (6 miles north-east).
Landmarks near Irby upon Humber
Our customers here include homes close to Church of Saint Andrew and the streets around them. Irby upon Humber’s nearest station is Healing station, roughly 4.1 miles north. Other landmarks nearby include Diana (4.3 miles east).
Looking after it afterwards
How the surface is treated afterwards matters:
- Don’t leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, and rinse off any bath products.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
What happens on the day
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. You can expect it to take the best part of a day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Irby upon Humber. What changes the price is:
- How hard the colour is to match
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
You can typically get a fixed price without us visiting. To help us price it:
- Natural light rather than flash
- A wider photo showing the entire bath
- Something in shot to show the size
- The postcode, so we can plan the visit
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
What we can’t put right
Some jobs are not right for a repair, including:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Irby upon Humber
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Your questions about bath re-enamelling in Irby upon Humber
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can you price it without visiting?
Generally, yes. Clear photos let us give you a fixed price without visiting.
Is there any odour?
Expect a mild smell while we are working, which fades afterwards.
How much does bath re-enamelling cost in Irby upon Humber?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your DN37 postcode.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
What areas do you cover?
We cover the whole UK, including Irby upon Humber and the rest of North East Lincolnshire. Just include your postcode and we will confirm dates.
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
