Hampshire · England
Bath Re-enamelling in Itchen Stoke
Bath re-enamelling across Itchen Stoke and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A coloured bath you want in white
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- The material and finish
- Any earlier repairs that need removing first
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
You can typically get a fixed price without us visiting. To help us price it:
- Something in shot to show the size
- One sharp close-up of the damage
- Any details about the material
- Your postcode, so we can check dates
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Bath re-enamelling at your home in Itchen Stoke
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We are often asked to fix a bath that stays dull however much you clean it and a period or roll-top bath worth keeping, on acrylic baths, cast iron baths and basins & shower trays.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Area
- Itchen Stoke (SO24)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Itchen Stoke
Also in Itchen Stoke
Looking after it afterwards
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Have chips seen to early
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs immediately
- Never use suction bath mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Our work in Itchen Stoke
Itchen Stoke is about 5 miles north-east of Winchester, in Hampshire. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Itchen Stoke is one of 683 towns and villages in Hampshire where we work. You can also see our page for London, about 56 miles away.
We cover every part of the SO24 postcode area. You’ll find Itchen Stoke on the B3047, so it’s easy for us to reach. If you are just outside Itchen Stoke, we cover Ovington (1 mile south-east), Itchen Abbas (1 mile west), Martyr Worthy (2 miles west), Temple Valley (3 miles south-west) and Easton (3 miles west). Further out, we also cover Basingstoke (13 miles north), Winchester (5 miles south-west), Eastleigh (10 miles south-west), Andover (15 miles north-west), Horndean (15 miles south-east) and Chandler's Ford (11 miles south-west).
Local landmarks in Itchen Stoke
Locally, our jobs take us to homes close to Perins School, St Mary's Church and The Bush Inn and the streets around them. Well-known places in the area include St John's Rooms And Chapel (4.7 miles south-west) and Wolvesey Castle (4.8 miles south-west). Open spaces near Itchen Stoke include Twyford Down and Winnall Moors.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What we can’t put right
A repair is not right for every job, including:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
FAQs for Itchen Stoke
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
Landlord and trade work in Itchen Stoke
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Common problems we fix in Itchen Stoke
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Common reasons people in Itchen Stoke contact us are:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
Before you book anyone
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- What prep work is covered
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why Itchen Stoke clients choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
- Same prices wherever you are
- Colour mixed on the day to match
Read our pricing or bath cost comparison.
How it works
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It typically takes the best part of a day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Clear the area around the damage
- Point us to the nearest place to park
- Have a window or extractor fan available
Ask for a price
Send us pictures of the damage and a wider shot of the whole item, and tell us you’re in Itchen Stoke, and we will come back with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
