Hampshire · England
Bath Re-enamelling in Andover
Full bath re-enamelling and resurfacing for homes and businesses in Andover and across Hampshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- Wear marks under the taps
Bath re-enamelling in Andover without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. We regularly repair cast iron baths, Victorian roll-tops and basins & shower trays, and people most frequently call us about an original cast iron bath that needs restoring and lots of chips and rust spots.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Andover (SP10, SP11)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
Before booking, it’s worth knowing the limits too:
- Holes rusted through the metal
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Andover
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Our work in Andover
Andover is about 17 miles west of Basingstoke, in Hampshire. Across the SP10 area, we come to you. Our repair technicians cover all 683 towns and villages in Hampshire, from the larger towns to small villages. Our nearest city page is London, about 63 miles away.
Jobs in SP10 and SP11 are booked in the same way as anywhere else. Whether you live on High Street, Goddard Square and London Road or anywhere nearby, a technician can come to you. Being close to the A303 and A342, Andover is simple for us to get to. We also travel to Picket Twenty (1 mile east), East Anton (1 mile north-east), Knights Enham (1 mile north), Finkley Down (2 miles north-east) and Picket Piece (2 miles east). Larger places within reach include Winchester (13 miles south-east), Romsey (15 miles south), Hyde (12 miles south-east), Tidworth (8 miles west), Weeke (12 miles south-east) and Kempshott (15 miles east). As one of the bigger places in Hampshire, Andover sees plenty of our work.
Near you in Andover
We visit homes around Church of St Mary, Winton Community Academy and Winton Community Academy, among other places. Other local landmarks include The Angel Inn (under half a mile east) and St John the Baptist Catholic Primary School (less than half a mile west). Andover’s nearest station is Andover station, about 0.5 miles west of the centre. Other landmarks nearby include Andover War Memorial Hospital (0.7 miles north-west) and Andover Museum (under half a mile east). The countryside around Andover includes Anton Lakes and Mill Lake.
Questions from Andover
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you come to Andover?
Yes. We cover the whole UK and travel to Andover. Send photos and we’ll quote, or call 0345 017 0787.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you cover the entire of Hampshire?
The whole UK, including all of Hampshire. Just include your postcode and we’ll offer you dates.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Aftercare tips
Once the work has cured, treat it gently:
- Don’t leave a chip unrepaired
- Never use suction bath mats
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What we do, step by step
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow the best part of a day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
- Keep pets and children out of the room while we work
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Related advice
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
For landlords and businesses
For anyone letting property in or around Andover, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The material and finish
- The type of damage
Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- One picture of the whole bath
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
If you are in Andover and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Nearby places to Andover
Also in Andover
When to call us in Andover
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
The things clients normally mention when they call are:
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Before booking anyone
- What aftercare is recommended
- Who will actually do the work
- Is the price fixed, and does it include VAT?
- Whether there are any call-out or travel charges
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
