Newcastle upon Tyne · England
Bath re-enamelling & resurfacing in Jesmond, Newcastle upon Tyne
Damaged bath in Jesmond? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A roll-top that’s seen better days
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wash away dyes and oils after use
- Repair dripping taps early
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Bath re-enamelling in Jesmond without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We are often asked to fix a coloured bath you want in white and worn patches where water runs and sits, on acrylic baths, pressed steel baths and Victorian roll-tops.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Jesmond (NE2, NE1, NE6)
- Region
- Newcastle upon Tyne
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
Getting a price
Send us a picture of the damage and one of the entire item, and tell us you’re in Jesmond, and we will come back with a fixed quote.
Related advice
Jesmond: your questions answered
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Are there extra charges for Jesmond?
No. Our quotes include travel, and we charge the same wherever you are.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
How do I get a price for bath re-enamelling in Jesmond?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
When to call us in Jesmond
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The things clients usually mention when they call include:
- An old resurfacing that’s failing
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
Comparing quotes
- Whether they match the colour on site
- Whether a trained technician does the job
- What protection goes down before work starts
- The length of the guarantee and what it covers
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Jesmond
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Our work in Jesmond
Jesmond is about 1 mile east of Newcastle upon Tyne, in Newcastle upon Tyne. Anywhere in NE2, we carry out the work at your property. Jesmond is one of 63 towns and villages in Newcastle upon Tyne we cover.
We cover every part of NE2, NE1 and NE6 and the streets around it. Streets in the area include Vine Lane, Durant Road and Lily Avenue. Jesmond is on the A167(M), so it’s easy for us to reach. We also travel to Quayside (1 mile south), Spital Tongues (1 mile west), Westgate (1 mile south-west), Newcastle upon Tyne (1 mile west) and Elswick (2 miles south-west). We also work in nearby towns such as Carr Hill (3 miles south), Denton (4 miles west), Slatyford (3 miles west), Low Fell (4 miles south), Sheriff Hill (3 miles south) and West Denton (4 miles west).
Landmarks near Jesmond
Around Jesmond, we work in homes near Jesmond railway station pub, Royal Grammar School and Castle Leazes and the streets around them. Nearby too are Jesmond Parish Church (less than half a mile west), Newcastle High School for Girls (under half a mile north-west), St Catherine's RC Primary School (less than half a mile east) and Newcastle University Library (less than half a mile south-west). The closest station to Jesmond is Manors station, roughly 0.7 miles south of the centre. Other landmarks nearby include East Gosforth (0.6 miles north-east) and Museum of Antiquities (0.5 miles south-west). For a walk, there’s Bent Hill and Havannah Nature Reserve.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Jesmond. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Work done at your home or business
- No need to remove anything
- Most jobs done in one visit
- Honest advice, even when it means no job
Take a look at our prices page and guide to resurfacing and replacement costs.
Nearby places to Jesmond
More services for Jesmond
Landlords, agents and businesses in Jesmond
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What affects the price in Jesmond
Resurfacing from £350. We don’t charge extra for travel to Jesmond. The price depends on:
- Any earlier repairs that need removing first
- The type of damage
- The material and finish
- How much damage there is
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
Two or three clear pictures are generally enough. It helps if you send:
- Good light, ideally daylight, without flash glare
- Any details about the material
- One picture of the entire bath
- A clear, close picture of the problem area
To get a price, send two or three photos through our quote form or call us. We will tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
