East Sussex · England
Bath Re-enamelling in Jevington
Bath re-enamelling for Jevington, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A roll-top that is seen better days
- Chips and rust in more than one place
How we handle bath re-enamelling in Jevington
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people get in touch are several chips and rust patches and a peeling or bubbling previous coating.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Jevington (BN26)
- Region
- East Sussex
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Jevington and the surrounding area
Jevington is about 3 miles west of Eastbourne, in East Sussex. Customers in Jevington get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 289 places across East Sussex, from the larger towns to small villages. We work right across the region, from Jevington to London (51 miles away).
Jobs in BN26 work the same way as everywhere else we cover. Local streets include Jevington Road, Church Lane and Green Lane, all of which we cover. Nearby, we also work in Ratton Village (2 miles east), Friston (2 miles south), East Dean (2 miles south), Old Town (3 miles south-east) and Hampden Park (3 miles east). Larger places within reach include Eastbourne (3 miles east), Bexhill-on-Sea (12 miles east), Seaford (5 miles west), Lewes (11 miles north-west), Hailsham (5 miles north) and St Leonards (15 miles east).
What’s near Jevington
In Jevington, that means homes near The Parish Church of St Andrew, Willingdon Community School and The Eight Bells Inn, among other places. The nearest railway station is Polegate station, roughly 2.3 miles north-east. Nearby you will also find Burlough Castle (2.6 miles north-west) and Eastbourne District General Hospital (2.3 miles east). For a walk, there’s Combe Hill.
Work for landlords and builders
Landlords, letting agents and housing providers in Jevington use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Also near Jevington
Also in Jevington
What affects the price in Jevington
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- Previous DIY repairs that have to come out
- How many areas need work
- What the surface is made of
- How hard the colour is to match
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
How to get a fixed quote
Two or three clear photos are generally enough. Try to include:
- What it’s made of, if you know
- A wider photo showing the entire bath
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
To get a price, send two or three pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
How to look after the repair
Simple care helps the repair last. We recommend:
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- We leave the room as we found it
- Honest advice, even when it means no job
- Nothing taken out or refitted
- Most jobs done in one visit
Take a look at our pricing and bath cost comparison.
What a repair cannot fix
It helps to know what we can’t do too:
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
What we are called out for in Jevington
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
People usually call us when they notice something like this:
- An old resurfacing that is failing
- Stains that won’t shift
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Questions to ask before booking
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
- When it can be used again
- What the guarantee covers, and for how long
How it works
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes a full day for most jobs. The room is left tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Ensure the room can be ventilated
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Advice
Jevington questions
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
About our accreditations · Every repair comes with a one-year guarantee.
