Barnsley · England
Bath re-enamelling & resurfacing in Jump, Barnsley
Local bath re-enamelling for Jump: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A roll-top that’s seen better days
How we handle bath re-enamelling in Jump
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include an old resurfacing that’s failing and a coloured bath you want in white, on basins & shower trays, Victorian roll-tops and pressed steel baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Jump (S74, S73)
- County
- Barnsley
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Doing more than one item at once
- What kind of damage it is
- Where the damage is and how we get to it
- How much damage there is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Two or three clear pictures are typically enough. Try to include:
- Whether it’s been repaired or coated before
- The material, if you know it
- Your postcode, so we can check dates
- One picture of the whole bath
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Common problems we fix in Jump
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Most people contact us after spotting one of these:
- A bath in a colour that no longer suits
- Wear marks under the taps
- A dull, rough surface that will not come clean
- A roll-top that is seen better days
Questions to ask before you book
- When it can be used again
- How changes to the job are handled
- Whether they match the colour on site
- What prep work is covered
Questions from Jump
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Nearby places to Jump
Other services in Jump
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Aftercare tips
Simple care helps the repair last. Our advice:
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Respect the curing time we give you
- Store bottles off the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Where we work around Jump
Jump is about 2 miles south-west of Wombwell, in Barnsley. Jobs in Jump are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our repair technicians cover 94 places across Barnsley. Our nearest city page is Leeds, about 21 miles away.
Our visits in S74 and S73 are booked in the same way as anywhere else. Local streets include Wentworth Road, Ellin Close and Arundel View, all of which we cover. Close by, we cover Platts Common (1 mile west), Hemingfield (1 mile east), Blacker Hill (1 mile north-west), Upper Hoyland (1 mile west) and Wombwell (2 miles north-east). We also work in nearby towns such as Barnsley (4 miles north-west), Wath upon Dearne (3 miles east), Shaw Lands (4 miles north-west), Wilthorpe (5 miles north-west), Cudworth (5 miles north) and Thurnscoe (5 miles north-east).
Near you in Jump
Typical jobs here are in homes near Kirk Balk Academy, St George and Jump Primary School and the streets around them. The closest station to Jump is Elsecar station, about 0.6 miles south of the centre. Other landmarks nearby include Alhambra Shopping Centre (3.7 miles north-west) and Worsbrough Mill Museum (2.3 miles north-west). For a walk, there’s Greno Woods.
Repairing versus replacing in Jump
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Colour-matched on site
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
Take a look at our full price list or guide to resurfacing and replacement costs.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which usually takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Ensure the area is dry
Getting a price
Upload a picture of the damage and one of the entire item, with your S74 postcode, and we will come back with a fixed quote.
Read more
When we’d advise against a repair
We will always be straight with you, so here’s what a repair won’t do:
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
