Worcestershire · England

Bath Re-enamelling in Kent's Green

Bath re-enamelling for Kent's Green, without a refit. Send us photos for a fixed quote, then book a visit.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Kent's Green

The process

There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take most of the day, including clearing up.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available

Ask for a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed price

Related advice

Bath re-enamelling in Kent's Green without replacing anything

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We regularly repair basins & shower trays, Victorian roll-tops and cast iron baths, and the jobs we see most are a peeling or bubbling previous coating and worn patches where water runs and sits.

Whatever the size of the job, it’s backed by a one-year guarantee in Kent's Green and across Worcestershire.

Stained basin resurfaced to clean white (before and after)
Area
Kent's Green (WR2)
Region
Worcestershire
Guarantee
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Why repair rather than replace?

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Repair technicians who travel to you, UK-wide
  • Free fixed quotes from pictures
  • Same prices wherever you are
  • Honest advice, even when it means no job

Take a look at our full price list and resurfacing vs replacement cost guide.

When to call us in Kent's Green

Often the bath has just had decades of use. Underneath, a cast iron or steel bath is typically as strong as ever.

If you can see any of these, send us a picture:

  • Staining under the taps and around the waste
  • Chips and rust in more than one place
  • An outdated colour you’d like to change
  • An old resurfacing that is failing

Questions to ask before booking

  • The length of the guarantee and what it covers
  • Whether the price is fixed and includes VAT
  • When it can be used again
  • What prep work is covered

Choosing a repair company

Prices and what affects them

Prices start from £350. Every quote is fixed and free. What we take into account:

  • Whether we combine several jobs
  • The material
  • Any earlier repairs that need removing first
  • What kind of damage it is

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Send pictures for a quote

Good photos mean an accurate price. Here’s what we find most useful:

  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size
  • Natural light rather than flash
  • The postcode, so we can plan the visit

If you are in Kent's Green and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

About Kent's Green

Kent's Green is about 3 miles north-east of Great Malvern, in Worcestershire. Whether you’re in the middle of Kent's Green or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Kent's Green is one of 376 towns and villages in Worcestershire where we work. Our jobs stretch from Kent's Green to Birmingham (27 miles away).

All of WR2 is covered, from the main roads to the quietest streets. If you are just outside Kent's Green, we cover Callow End (1 mile south-east), Deblin's Green (1 mile south-west), Collett's Green (1 mile north-west), Bowling Green (1 mile north-west) and Bastonford (1 mile north-west). Further out, we also cover Worcester (4 miles north-east), Bromsgrove (15 miles north-east), Great Malvern (3 miles south-west), Droitwich Spa (9 miles north-east), Evesham (14 miles east) and Stourport-on-Severn (13 miles north).

Near you in Kent's Green

Locally, our jobs take us to homes close to Stanbrook Abbey Stanbrook Abbey Church and Callow End CofE Primary School and the streets around them. The nearest railway station is Malvern Link station, roughly 3.1 miles south-west. Well-known places in the area include Worcester Castle (3 miles north-east) and CrownGate Shopping Centre (3.4 miles north-east). Open spaces near Kent's Green include End Hill.

Map of Kent's Green © OpenStreetMap contributors

Your questions about bath re-enamelling in Kent's Green

Can a failed resurfacing be redone?

In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Is repairing better than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

What if the damage is worse than the photos show?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

How much does bath re-enamelling cost in Kent's Green?

Prices start from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Wipe the bath dry after use in hard water areas
  • Rinse off hair dye, oils and bath bombs right away
  • Don’t use the bath until it has fully cured
  • Use washing-up liquid and a soft cloth

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Do not try to scrub a worn bath back to shine. It removes more of the surface.

What a repair can’t fix

Some jobs aren’t right for a repair, including:

  • Leaking taps or wastes (a plumber’s job)
  • Acrylic that moves when you stand in it
  • Damage hidden under a previous coating, until it’s stripped back

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.