Cheshire East · England

Bath Re-enamelling in Key Green

Fixed-price bath re-enamelling in Key Green and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Key Green

How we handle bath re-enamelling in Key Green

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Common call-outs are for a coating lifting around the plughole and several chips and rust patches, across Victorian roll-tops, pressed steel baths and cast iron baths.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.

Area
Key Green (CW12)
Region
Cheshire East
Guarantee
12 months on all our work
Quotes
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Covering Key Green

Key Green is about 2 miles east of Congleton, in Cheshire East. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Key Green is one of 254 places in Cheshire East where we work. Our nearest city page is Manchester, about 21 miles away.

We work across CW12. Local streets include Crouch Lane, Weathercock Lane and Middle Lane. If you are just outside Key Green, we cover Cloud Side (1 mile east), Timbersbrook (1 mile south), Buglawton (1 mile west), Havannah (1 mile north-west) and Mossley (1 mile south-west). Within a short drive, we also cover Crewe (13 miles south-west), Macclesfield (6 miles north), Wilmslow (11 miles north), Knutsford (12 miles north-west), Middlewich (12 miles west) and Sandbach (8 miles west).

Local landmarks in Key Green

We visit homes around Buglawton Primary School and Eaton Bank Academy. The nearest railway station is Congleton station, roughly 1.3 miles south-west of the centre. A little further out are Mow Cop Castle (4.4 miles south-west). Green spaces nearby include Black Firs Wood Nature Reserve and Astbury Mere.

Map of Key Green © OpenStreetMap contributors

Prices and what affects them

Resurfacing from £350. You will know the full cost before you book. We look at:

  • Where the damage is and how we get to it
  • The material
  • How many items we do on one visit
  • Previous DIY repairs that have to come out

A repair is priced on what needs doing, not your postcode. You will see the full price before booking.

Send pictures for a quote

Good pictures mean an accurate price. Here’s what helps:

  • A picture taken from further back
  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage
  • The postcode, so we can plan the visit

Most clients in Key Green get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Signs you need bath re-enamelling in Key Green

Hard water speeds up the wear, and abrasive cleaners do the most damage.

Keep an eye out for any of the following:

  • Brown or grey marks that do not clean off
  • A coating lifting around the plughole
  • A dull, rough surface that will not come clean
  • Wear marks under the taps

Comparing quotes

  • What prep work is covered
  • If travel is included in the price
  • Whether a trained technician does the job
  • How the colour is matched

Our hiring checklist

Questions from Key Green

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

What happens once I’ve sent photos?

We review the pictures and send a fixed quote with dates.

Will the new finish last?

Care for it and it lasts. Gentle cleaning, no suction mats.

Is a repair better than a new one?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

How long does re-enamelling take?

Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

What does bath re-enamelling cost?

Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your CW12 postcode.

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

How to look after the repair

To keep it looking its best for years:

  • Do not use the bath until it has fully cured
  • Get any chip repaired quickly
  • Stick to gentle, non-abrasive cleaners
  • Fix dripping taps quickly

Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.

Honest limits

In fairness, some problems need a different fix:

  • Holes rusted through the metal
  • Damage hidden under a previous coating, until it’s stripped back
  • An acrylic bath that flexes badly underfoot

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths

What happens on the day

There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take most of the day, including clearing up.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Preparing for the visit

  • Let the surface dry out before the visit
  • Clear the area around the damage
  • Open a window if you can

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a fixed price

Read more

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.