Hampshire · England
Bath re-enamelling & resurfacing in Kimbridge, Hampshire
Damaged bath in Kimbridge? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A roll-top that is seen better days
Aftercare tips
Aftercare is simple:
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs right away
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Bath re-enamelling at your home in Kimbridge
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a bath in a colour that no longer suits and wear marks under the taps, in pressed steel baths, cast iron baths and Victorian roll-tops.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Area
- Kimbridge (SO51)
- County
- Hampshire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Kimbridge
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Most people contact us after spotting one of these:
- A roll-top that is seen better days
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
What your quote should include
- Whether they match the colour on site
- When it can be used again
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
Landlord and trade work in Kimbridge
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Our work in Kimbridge
Kimbridge is about 3 miles north-west of Romsey, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 683 towns and villages across Hampshire, from the larger towns to small villages. You can also see our page for London, about 70 miles away.
Jobs in SO51 work the same way as everywhere else we cover. We also cover the places around Kimbridge: Dunbridge (1 mile north-west), Mottisfont (1 mile north), Stonymarsh (1 mile north-east), Michelmersh (1 mile east) and Timsbury (1 mile east). Larger places within reach include Winchester (10 miles east), Eastleigh (9 miles south-east), Andover (13 miles north), Totton (8 miles south), Chandler's Ford (7 miles south-east) and Hedge End (13 miles south-east).
Near you in Kimbridge
Locally, our jobs take us to homes close to Awbridge Primary School, The Bear And Ragged Staff Public House and Church of St Andrew and the streets around them. For rail, the closest station is Mottisfont & Dunbridge station, roughly 0.8 miles north-west. Further afield, we also cover the area around King Johns House (3 miles south-east) and Romsey Community Hospital (3.3 miles south-east). Not far away are Emer Bog and Baddesley Common.
What a repair cannot fix
A repair isn’t right for every job, including:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly before booking.
Materials we work on in Kimbridge
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Also near Kimbridge
Other services in Kimbridge
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Kimbridge. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- A fixed quote before booking
- Nothing taken out or refitted
Read our full price list or guide to resurfacing and replacement costs.
Kimbridge questions
Can a failed resurfacing be redone?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What we do, step by step
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a full day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Let us know which floor the room is on
Getting a price
Most clients in Kimbridge get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
What affects the price in Kimbridge
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Doing more than one item at once
- The material and finish
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Two or three clear pictures are usually enough. Try to include:
- A clear, close picture of the problem area
- Details of any past repairs
- The postcode, so we can plan the visit
- Something in shot to show the size
To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
