Devon · England

Bath re-enamelling & resurfacing in Kingsdon, Devon

Problem with your bath in Kingsdon? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • A roll-top that is seen better days
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Kingsdon

Repair or replace: which is better?

A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

What you get with us

  • We come to you, anywhere in the UK
  • CHAS, Constructionline and SafeContractor accredited
  • We’ll tell you if it’s not worth repairing
  • Everything repaired in place

See our pricing or bath cost comparison.

Bath re-enamelling at your home in Kingsdon

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Typical jobs include a bath that stays dull however much you clean it and brown or grey marks that don’t clean off, across pressed steel baths, basins & shower trays and Victorian roll-tops.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.

Area
Kingsdon (EX24)
Region
Devon
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What happens on the day

Arrival times are agreed in advance. Once we’re there, the work takes most of the day in most cases. The room is left tidy and ready to use once it has cured.

  1. The room is masked, protected and ventilated.
  2. We clean and degrease the bath and repair any chips or rust.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s generally ready the next day.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Let the surface dry out before the visit
  • Tell us about parking, stairs or access

Ask for a price

If you are in Kingsdon and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Send photos for a quote

Read more

What your bath is made of matters

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Where we work around Kingsdon

Kingsdon is about 7 miles south-east of Honiton, in Devon. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We cover 586 places in Devon, from the larger towns to small villages.

Postcode districts we cover here: EX24. Whether you live on Cownhayne Lane, Kingsdon Hill and Lisham's Drain or a nearby road, a technician can come to you. Other places close to Kingsdon include Colyton (1 mile south-west), Colyford (1 mile south), Whitford (1 mile north-east), Musbury (2 miles east) and Maidenhayne (2 miles north-east). Larger places within reach include Sidmouth (8 miles south-west), Honiton (7 miles north-west), Cranbrook (15 miles west), Axminster (4 miles north-east), Budleigh Salterton (14 miles south-west) and Ottery St Mary (9 miles west).

Local landmarks in Kingsdon

Locally, our jobs take us to homes close to Colyton Primary School, Colyton Grammar School and Church of St Andrew. The closest station to Kingsdon is Axminster station, roughly 3.6 miles north-east of the centre. Further afield, we also cover the area around Axminster Hospital (4.1 miles north-east) and Colcombe Castle (under half a mile north-west).

Map of Kingsdon © OpenStreetMap contributors

Do you need bath re-enamelling in Kingsdon?

Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is generally as strong as ever.

It’s worth getting a quote if you see:

  • An original cast iron bath that needs restoring
  • A dull, rough surface that won’t come clean
  • Several chips and rust patches
  • A peeling or bubbling previous coating

Before you book anyone

  • Whether the price is fixed and includes VAT
  • Whether cleaning and preparation are in the price
  • Who turns up on the day
  • What the guarantee covers, and for how long

10 questions to ask before booking

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Keeping it looking good

So the finish stays in good condition:

  • Clean with a soft cloth and mild detergent
  • Do not leave a chip unrepaired
  • Fix dripping taps quickly
  • A quick wipe after use keeps limescale away

The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Your questions about bath re-enamelling in Kingsdon

Can I get a quote without a visit?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as householders in Kingsdon.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

Can you repair something that’s been repaired before?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

Do the materials smell?

Expect a mild smell while we’re working.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

Honest limits

In fairness, some problems need a different fix:

  • Problems we can’t see until an old finish comes off
  • Plumbing leaks, which need a plumber
  • A cast iron or steel bath that is cracked right through

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths

For landlords and businesses

For anyone letting property in or around Kingsdon, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.