Devon · England
Bath Re-enamelling for Axminster homes
Bath re-enamelling in Axminster without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
About our bath re-enamelling in Axminster
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair pressed steel baths, acrylic baths and basins & shower trays, and common reasons people contact us are lots of chips and rust spots and a roll-top that’s seen better days.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Axminster (EX13)
- Region
- Devon
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Axminster and nearby
Axminster is about 12 miles north-east of Sidmouth, in Devon. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Axminster is one of 586 towns and villages in Devon where we work.
Here we cover the EX13 postcode area. That includes homes on Coombe Lane, Lyme Street and Field End and the roads around them. Axminster sits on or near the A358 and B3261, so getting to you is simple. Other places close to Axminster include Sector (1 mile east), Weycroft (1 mile north-east), Raymond's Hill (2 miles south-east), Blackpool Corner (2 miles east) and Yawl (3 miles south-east). We also work in nearby towns such as Sidmouth (12 miles south-west), Honiton (9 miles west), Seaton (6 miles south-west), Ottery St Mary (13 miles west), Colyton (4 miles south-west) and Sidford (12 miles south-west).
Local landmarks in Axminster
Locally, our jobs take us to homes close to Axminster Community Primary Academy, Red Lion Inn and United Reformed Church, among other places. For rail, the closest station is Axminster station, roughly 0.5 miles west of the centre. Further afield, we also cover the area around Colcombe Castle (3.9 miles south-west) and Axminster Hospital (under half a mile north-west). Not far away are Lambert's Castle Hill.
When we’d advise against a repair
Before booking, it’s worth knowing the limits too:
- Holes rusted through the metal
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Whether we combine several jobs
- How much damage there is
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, with no extra for Axminster. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A picture taken from further back
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Something in shot to show the size
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Getting a price
Most customers in Axminster get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Also near Axminster
Other services in Axminster
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs immediately
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Common questions in Axminster
What happens once I’ve sent pictures?
You will get a fixed quote back. You’re under no obligation.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Landlord and trade work in Axminster
If you manage property in Axminster, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Axminster
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
- No need to remove anything
- One-year guarantee on every repair
Read our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
