Fife · Scotland
Bath re-enamelling & resurfacing in Kingseat, Fife
Bath re-enamelling in and around Kingseat: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Work for landlords and builders
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Bath re-enamelling at your home in Kingseat
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Whether it’s chips and rust in more than one place and stains that won’t shift, we can help, on cast iron baths, Victorian roll-tops and pressed steel baths alike.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Kingseat (KY12)
- County
- Fife
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
Send us pictures and we’ll tell you honestly before you book.
Materials we work on in Kingseat
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Other services in Kingseat
What affects the price in Kingseat
Prices start from £350. You will know the full cost before booking. We take into account:
- Unusual colours or finishes
- Where the damage is and how we get to it
- The type of damage
- How many items we do on one visit
A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Common questions in Kingseat
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
Which areas do you work in?
The entire UK, including all of Fife. Just include your postcode and we’ll confirm dates.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
What happens once I’ve sent photos?
You’ll get a fixed quote back. There is no obligation to book.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs right away
- Don’t leave a chip unrepaired
- Avoid suction-cup mats
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. It typically takes most of the day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Tell us about any previous repairs or coatings
- Make sure the area is dry
- Keep children and pets away from the room on the day
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Where we work around Kingseat
Kingseat is about 2 miles north-east of Dunfermline, in Fife. We visit clients in Kingseat and the surrounding area, so you don’t need to take anything anywhere. Kingseat is one of 133 towns and villages in Fife where we work. We work right across the region, from Kingseat to Edinburgh (13 miles away).
Postcode districts we cover here: KY12. You will find streets such as Main Street, Greenacres and Lochwood Park, all of which we cover. If you’re just outside Kingseat, we cover Townhill (1 mile south-west), Dunfermline (2 miles south-west), Abbeyview (2 miles south), Wellwood (2 miles west) and Pitreavie (3 miles south). We also work in nearby towns such as Kirkcaldy (9 miles east), Glenrothes (11 miles north-east), Dysart (11 miles east), Dalgety Bay (5 miles south-east), Rosyth (4 miles south) and Lochgelly (4 miles north-east).
Near you in Kingseat
We visit homes around Woodmill High School and the streets around them. Kingseat’s nearest station is Dunfermline Queen Margaret station, roughly 1.3 miles south-west. Nearby you will also find Dunfermline Palace (2.9 miles south-west) and Queen Margaret Hospital (1.3 miles south-west). For a walk, there’s Loch Fitty.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
When to call us in Kingseat
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- A bath in a colour that no longer suits
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether cleaning and preparation are in the price
- Whether the price covers travel
- Who will actually do the work
- Whether they match the colour on site
About our accreditations · Every repair comes with a one-year guarantee.
