Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Kingswood, Cheshire West and Chester
Fixed-price bath re-enamelling in Kingswood and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
Bath re-enamelling in Kingswood, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on pressed steel baths, Victorian roll-tops and basins & shower trays, and common reasons people contact us are an outdated colour you’d like to change and a dull, rough surface that won’t come clean.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Kingswood (WA6)
- Region
- Cheshire West and Chester
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Kingswood
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Kingswood. The price depends on:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- Unusual colours or finishes
- Doing more than one item at once
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- The material, if you know it
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
About Kingswood
Kingswood is about 5 miles south of Runcorn, in Cheshire West and Chester. Across the WA6 area, a technician comes to you. We work in 224 places in Cheshire West and Chester. Our jobs stretch from Kingswood to Liverpool (about 13 miles away).
Every address in WA6 is covered, from the main roads to the quietest streets. You’ll find streets such as Newton Hollow and Bushells Lane. Other places close to Kingswood include Manley Common (1 mile south), Buckoak (1 mile south-west), Alvanley (2 miles west), Overton (2 miles north) and Manley (2 miles south-west). We also work in nearby towns such as Chester (9 miles south-west), Ellesmere Port (8 miles west), Winsford (9 miles south-east), Northwich (8 miles east), Neston (14 miles west) and Boughton (9 miles south-west).
What’s near Kingswood
We visit homes around Helsby High School and Kingsley Community Primary School and Nursery and the streets around them. For rail, the closest station is Mouldsworth station, roughly 2.3 miles south of the centre. A little further out are Kingsley Castle (0.8 miles south-east) and Mouldsworth Motor Museum (2.3 miles south-west). For a walk, there is Dutton Park Farm Nature Reserve.
Looking after it afterwards
To keep it looking its best for years:
- Don’t use the bath until it has fully cured
- Never use suction bath mats
- Don’t leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Common problems we fix in Kingswood
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a photo:
- Thin, worn enamel in places
- A coating lifting around the plughole
- Stains that will not shift
- A coloured bath you want in white
Comparing quotes
- Aftercare advice
- A fixed price, and whether VAT is included
- How long the guarantee is and what it covers
- What happens if the damage is worse than the pictures show
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Places near Kingswood
More services for Kingswood
About our accreditations · Every repair comes with a one-year guarantee.
