Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Ellesmere Port, Cheshire West and Chester
Full bath re-enamelling and resurfacing at your home in Ellesmere Port, with a one-year guarantee on every repair.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Brown or grey marks that don’t clean off
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Bath re-enamelling in Ellesmere Port without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s wear marks under the taps and a roll-top that’s seen better days, we can help, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Ellesmere Port (CH66, CH65, CH2, CH1)
- Region
- Cheshire West and Chester
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Landlords, agents and businesses in Ellesmere Port
We carry out planned and one-off repairs for housing associations and facilities teams in Cheshire West and Chester and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Signs you need bath re-enamelling in Ellesmere Port
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Send us a photo if you notice any of these:
- Several chips and rust patches
- A dull, rough surface that will not come clean
- A coloured bath you want in white
- Stains that will not shift
Before booking anyone
- What aftercare is recommended
- The length of the guarantee and what it covers
- How the room is protected while they work
- What prep work is covered
Covering Ellesmere Port
Ellesmere Port is about 9 miles south of Liverpool, in Cheshire West and Chester. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Ellesmere Port is one of 224 towns and villages in Cheshire West and Chester where we work. Our jobs stretch from Ellesmere Port to Liverpool (9 miles away).
Every address in CH66, CH65, CH2 and CH1 is covered. From Station Road, Hyde Close and Cholmondeley Road or a nearby road, a technician can come to you. Ellesmere Port is on the A41 and A550, which makes it straightforward to reach. If you’re just outside Ellesmere Port, we cover Great Sutton (1 mile north), Whitby (1 mile east), Hope Farm (1 mile south), Little Sutton (1 mile north-west) and Overpool (1 mile north). Larger places within reach include Chester (6 miles south), Neston (6 miles west), Boughton (6 miles south), Frodsham (8 miles east), Hoole (6 miles south-east) and Newtown (5 miles south). Ellesmere Port is among the bigger towns we cover in Cheshire West and Chester.
Around Ellesmere Port
Locally, our jobs take us to homes close to The Straw Hat pub, Ellesmere Port Catholic High School and Whitby Park, among other places. You’ll also find The Acorns Primary and Nursery School (within half a mile north) and St. Thomas (less than half a mile east). The nearest railway station is Overpool station, roughly 0.7 miles north-west of the centre. Other landmarks nearby include Ellesmere Port Hospital (0.6 miles south-east) and Cheshire Oaks Designer Outlet (1.6 miles south-east). Open spaces near Ellesmere Port include Gowy Meadows Nature Reserve.
- Parks and local facilities nearby include Municipal Borough of Ellesmere Port (0.9 miles north-east)
Questions from Ellesmere Port
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send pictures.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Ellesmere Port.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Places near Ellesmere Port
Also in Ellesmere Port
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
- Work done at your home or business
Take a look at our full price list and guide to resurfacing and replacement costs.
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. On site, it takes most of the day. We leave the room clean.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
