Herefordshire · England
Bath re-enamelling & resurfacing in Kingswood, Herefordshire
Bath re-enamelling across Kingswood and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Bath re-enamelling at your home in Kingswood
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for an original cast iron bath that needs restoring and a coating lifting around the plughole, on basins & shower trays, cast iron baths and Victorian roll-tops.
Big or small, you get the same one-year guarantee in Kingswood and across Herefordshire.
- Location
- Kingswood (HR5)
- County
- Herefordshire
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Kingswood
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
You may need us if you’ve spotted:
- A roll-top that’s seen better days
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether they match the colour on site
- What aftercare is recommended
- Whether there are any call-out or travel charges
- How long it needs to cure
Your questions about bath re-enamelling in Kingswood
What happens after I send pictures?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
How long does re-enamelling take?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you work in Kingswood?
We do. We send a technician to Kingswood for every job, with no extra charge for travel.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
Also near Kingswood
What else we do in Kingswood
Work for landlords and builders
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- Work done at your home or business
- Straight answers about what a repair can do
- Usually one visit, start to finish
- We leave the room as we found it
Take a look at our pricing and bath cost comparison.
Where we work around Kingswood
Kingswood is about 16 miles north-west of Hereford, in Herefordshire. Anywhere in HR5, we carry out the work at your property. Kingswood is one of 255 towns and villages in Herefordshire where we work. We work right across the region, from Kingswood to Birmingham (52 miles away).
Our technicians cover all of HR5 and the streets around it. You will find streets such as Kingswood Road and Piccadilly, all of which we cover. Neighbouring places we cover include Bredward (1 mile north-west), Chickward (1 mile south-west), Dukes (2 miles south), Brilley Mountain (2 miles south-west) and Lower Welson (3 miles south). Further out, we also cover Leominster (13 miles east), Whitecross (15 miles south-east), Widemarsh (15 miles south-east), Y Gelli Gandryll (8 miles south-west), Hay (9 miles south-west) and Bobblestock (14 miles south-east).
Landmarks near Kingswood
In Kingswood, that means homes near Lady Hawkins' School and St Silas Church and the streets around them. Nearby you will also find Kington Museum and History Centre (1.5 miles north) and Woodbrook (0.7 miles east). The countryside around Kingswood includes Bradnor Hill and Titley Pool.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the day after.
Preparing for the visit
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Let us know if it has been repaired before
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
When a repair isn’t the answer
A repair isn’t right for every job, including:
- A bath split right through the body
- Problems we cannot see until an old finish comes off
- A bath that’s rusted through
Send us photos and we will tell you honestly.
Materials we work on in Kingswood
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
What affects the price in Kingswood
Prices start from £350. We charge the same across the UK, including Kingswood. What changes the price is:
- Unusual colours or finishes
- How many areas need work
- How many items we do on one visit
- The material
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- Your postcode, so we can check dates
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
