Somerset · England
Bath Re-enamelling for Kingweston homes
Full bath re-enamelling and resurfacing for homes and businesses in Kingweston and across Somerset. Free, fixed quotes from your photos.
- Resurfacing from £350
- An outdated colour you’d like to change
- Wear marks under the taps
Landlord and trade work in Kingweston
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Kingweston use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Bath re-enamelling in Kingweston without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We work on Victorian roll-tops, acrylic baths and pressed steel baths, and the jobs we see most are lots of chips and rust spots and stains that won’t shift.
You get a one-year guarantee, the same in Kingweston as everywhere else we work.
- Area
- Kingweston (TA11)
- Region
- Somerset
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Kingweston
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Do you come to Kingweston?
Yes. We work across the UK and travel to Kingweston. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Which areas do you work in?
We cover the whole UK, including Kingweston and the rest of Somerset. Just include your postcode and we’ll confirm dates.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why Kingweston clients choose us
- Honest advice, even when it means no job
- Everything repaired in place
- A fixed quote before you book
- Every repair guaranteed for a year
Take a look at our pricing and guide to resurfacing and replacement costs.
How it works
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take most of the day, tidy-up included.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
When a repair isn’t the answer
We won’t take on work that will not last, so here’s what a repair cannot put right:
- A bath that is rusted through
- A metal bath with a through crack
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Aftercare tips
Aftercare is simple:
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
What affects the price in Kingweston
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Any earlier repairs that need removing first
- How many areas need work
- The material
- Where the damage is and how we get to it
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Quotes from your photos
Phone pictures are fine, there is no need for anything special. Just ensure we can see:
- A photo taken from further back
- Natural light rather than flash
- Something in shot to show the size
- A clear, close picture of the problem area
Send us a picture of the damage and a wider shot of the whole item, and tell us you’re in Kingweston, and we’ll come back with a fixed quote.
Our work in Kingweston
Kingweston is about 9 miles north of Yeovil, in Somerset. We travel to customers in Kingweston and nearby villages, so you don’t need to take anything anywhere. Our technicians cover all 640 towns and villages in Somerset, from the larger towns to small villages.
Here we cover the TA11 postcode area. Local streets include High Street and Kingweston Road, all of which we cover. Kingweston is on the B3153, which makes it straightforward to reach. Other places close to Kingweston include Barton St David (1 mile north-east), Plot Gate (1 mile north-east), Silver Street (1 mile north-east), Keinton Mandeville (1 mile east) and Charlton Mackrell (2 miles south). We also work in nearby towns such as Bridgwater (14 miles west), Yeovil (9 miles south), Wells (9 miles north), Shepton Mallet (9 miles north-east), Street (4 miles north-west) and Glastonbury (5 miles north).
Local landmarks in Kingweston
Around Kingweston, we work in homes near Church of All Saints and The Barton Inn and the streets around them. Open spaces near Kingweston include Glastonbury Tor.
Also near Kingweston
More services for Kingweston
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
