Denbighshire · Wales
Bath Re-enamelling for Kinmel Bay homes
Problem with your bath in Kinmel Bay? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
Kinmel Bay and the surrounding area
Kinmel Bay (Welsh: Bae Cinmel) is about 2 miles west of Rhyl, in Denbighshire. Clients in Kinmel Bay get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Kinmel Bay is one of 81 towns and villages in Denbighshire where we work. Our jobs stretch from Kinmel Bay to Liverpool (about 25 miles away).
Postcode districts we cover here: LL18. From Trem Elwy, Roseview Crescent and Trem-y-Ffair or a nearby road, a technician can come to you. We also travel to Towyn (1 mile south-west), Rhyl (2 miles east), Belgrano (2 miles south-west), Rhuddlan (2 miles south-east) and Pen-y-ffordd (2 miles east). Further out, we also cover Prestatyn (5 miles east), Denbigh (10 miles south-east), Fron (9 miles south-east), Copenhagen (9 miles south-east), Bryn Seion (9 miles south-east) and Lenten Pool (9 miles south-east). Kinmel Bay is one of the larger places we cover in Denbighshire.
Around Kinmel Bay
Our customers here include homes close to Ysgol Maes Owen, Church of Saint John and Blessed Edward Jones RC High School and the streets around them. Kinmel Bay’s nearest station is Rhyl station, about 1.3 miles north-east of the centre. Well-known places in the area include Rhyl Museum (1.4 miles north-east) and Royal Alexandra Hospital (1.9 miles north-east). For a walk, there’s Marine Lake and The Warren.
Bath re-enamelling in Kinmel Bay without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair acrylic baths, pressed steel baths and Victorian roll-tops, and people most frequently call us about a roll-top that’s seen better days and an old resurfacing that’s failing.
Big or small, you get the same one-year guarantee in Kinmel Bay and across Denbighshire.
- Area
- Kinmel Bay (LL18)
- Region
- Denbighshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
How the visit works
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes the best part of a day for most jobs. The room is left tidy and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Advice
Honest limits
A few problems are outside what a surface repair can do:
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Your questions about bath re-enamelling in Kinmel Bay
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Denbighshire.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What happens once I’ve sent photos?
You’ll get a fixed quote back, plus dates. You’re under no obligation.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Access to the area
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
When you take your photos, these tips help us give you a firm price:
- Details of any past repairs
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
What we are called out for in Kinmel Bay
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- Lots of chips and rust spots
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
Comparing quotes
- How long it needs to cure
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
- What happens if they find more damage
What else we do in Kinmel Bay
About our accreditations · Every repair comes with a one-year guarantee.
