Conwy · Wales
Bath Re-enamelling in Towyn
Our technicians come to Towyn for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Towyn without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. Typical jobs include chips and rust in more than one place and a peeling or bubbling previous coating, across acrylic baths, Victorian roll-tops and pressed steel baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Towyn (LL22)
- County
- Conwy
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition for years:
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Respect the curing time we give you
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
What you get with us
- A fixed quote before you book
- Nothing taken out or refitted
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page and guide to resurfacing and replacement costs.
What a repair cannot fix
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- A bath split right through the body
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Signs you need bath re-enamelling in Towyn
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
People usually call us when they notice something like this:
- Stains that won’t shift
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
- Wear marks under the taps
Comparing quotes
- Whether cleaning and preparation are in the price
- If travel is included in the price
- Who turns up on the day
- What protection goes down before work starts
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Common questions in Towyn
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Towyn and nearby
Towyn is about 3 miles south-west of Rhyl, in Conwy. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Towyn is one of 75 places in Conwy where we work. Our nearest city page is Liverpool, about 26 miles away.
Jobs in LL22 work the same way as everywhere else we cover. From Gors Road, Trem Cinmel and Llys Llewelyn or anywhere nearby, a technician can come to you. Nearby, we also work in Kinmel Bay (1 mile north-east), Belgrano (1 mile west), Pensarn (2 miles west), Llansan Sior (2 miles south) and Abergele (2 miles south-west). Within a short drive, we also cover Bae Colwyn (8 miles west), Llandudno (12 miles west), Old Colwyn (7 miles west), Colwyn Bay (7 miles west), Colwyn Bay (8 miles west) and Conwy (12 miles west).
What’s near Towyn
We visit homes around Ysgol Y Foryd, St Mary's Church and Ysgol Emrys Ap Iwan, among other places. For rail, the closest station is Abergele & Pensarn station, about 2 miles west of the centre. Other landmarks nearby include Rhyl Museum (2.5 miles north-east) and Glan Clwyd Hospital (2.6 miles south-east). The countryside around Towyn includes Rhuddlan Nature Reserve and Marine Lake.
What affects the price in Towyn
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- The size and number of damaged areas
- Whether we combine several jobs
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Whether it’s been repaired or coated before
- One picture of the entire bath
- Natural light rather than flash
- Any details about the material
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep a parking space free if you can
- Let us know about parking or access
- Tell us if there are stairs or a lift
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Also near Towyn
Also in Towyn
About our accreditations · Every repair comes with a one-year guarantee.
