Leicestershire · England
Bath Re-enamelling in Kirby Muxloe
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Kirby Muxloe. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Keeping it looking good
To keep it looking its best for years:
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Bath re-enamelling in Kirby Muxloe without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the next day. We are frequently asked to fix enamel that’s lost its shine and feels rough and worn patches where water runs and sits, in pressed steel baths, cast iron baths and Victorian roll-tops.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Kirby Muxloe (LE9)
- County
- Leicestershire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Kirby Muxloe and nearby
Kirby Muxloe is about 4 miles west of Leicester, in Leicestershire. We travel to homes and businesses in Kirby Muxloe, so nothing has to leave your home. Kirby Muxloe is one of 287 places in Leicestershire where we work. We work right across the region, from Kirby Muxloe to Birmingham (about 30 miles away).
Jobs in LE9 are booked in the same way as anywhere else. Jobs here include addresses on Station Road, Church Road and Main Street. We also cover the places around Kirby Muxloe: Leicester Forest East (1 mile south-east), Ratby (1 mile north-west), Glenfield (2 miles north-east), Leicester Forest West (2 miles south-west) and Groby (2 miles north). Larger places within reach include Loughborough (9 miles north), Hinckley (9 miles south-west), Wigston (6 miles south-east), Coalville (8 miles north-west), Ashby-de-la-Zouch (13 miles north-west) and Shepshed (10 miles north).
Landmarks near Kirby Muxloe
Around Kirby Muxloe, we work in homes near Church of St Bartholomew, Brookvale High School Groby and Kirby Frith Nature Reserve, among other places. Also close by are The Railway Inn (0.8 miles north) and Kirby Muxloe Primary School (under half a mile north-west). The nearest railway station is Narborough station, about 4.3 miles south. Well-known places in the area include Glenfield Hospital (2.6 miles north-east) and Kirby Muxloe Castle (within half a mile north). Open spaces near Kirby Muxloe include Sheet Hedges Wood and Old John.
Should you replace it?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why Kirby Muxloe clients choose us
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
- A year’s guarantee on all work
Read our full price list and bath cost comparison.
How it works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes most of the day for most jobs. The room is left tidy.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the day after.
How to prepare
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Related advice
When to call us in Kirby Muxloe
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Keep an eye out for any of the following:
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- A coating lifting around the plughole
What to look for in a quote
- A fixed price, and whether VAT is included
- How the room is protected while they work
- How long it needs to cure
- Who will actually do the work
When we would advise against a repair
Some jobs are not right for a repair, including:
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Kirby Muxloe
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Nearby places to Kirby Muxloe
Also in Kirby Muxloe
Landlords, agents and businesses in Kirby Muxloe
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Kirby Muxloe as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What bath re-enamelling costs
Prices start from £350. You will know the full cost before you book. We take into account:
- Where the damage is and how we get to it
- How many items we do on one visit
- Unusual colours or finishes
- Any earlier repairs that need removing first
Our prices are the same across the UK, so there’s no premium for Kirby Muxloe. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
We price nearly every job from photos. This is what we need:
- A coin beside the damage so we can judge size
- Details of any past repairs
- Your postcode, so we can check dates
- A close-up of the damage, in focus
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Kirby Muxloe: your questions answered
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
About our accreditations · Every repair comes with a one-year guarantee.
