Shropshire · England

Bath re-enamelling & resurfacing in Knolton, Shropshire

Full bath re-enamelling and resurfacing at your home in Knolton, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Wear marks under the taps
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Knolton

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Dry the bath after use to stop limescale
  • Fix dripping taps quickly
  • Don’t let dyes or oils sit on the finish
  • Clean with a soft cloth and mild detergent

Wipe the bath dry after use where you can, and rinse away any product left on the surface.

On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.

Bath re-enamelling in Knolton without replacing anything

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on pressed steel baths, Victorian roll-tops and basins & shower trays, and common reasons people contact us are several chips and rust patches and a coating lifting around the plughole.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Location
Knolton (SY12)
County
Shropshire
Guarantee
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What we do, step by step

Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take the best part of a day.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Tell us about any previous repairs or coatings
  • Keep pets and children out of the room while we work
  • Let us know about parking or access

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a fixed price

Advice

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.

Where we work around Knolton

Knolton is about 8 miles north-east of Oswestry, in Shropshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in 433 places across Shropshire, from the larger towns to small villages. We work right across the region, from Knolton to Liverpool (32 miles away).

Here we cover the SY12 postcode area. Neighbouring places we cover include Lightwood Green (1 mile north), Dudleston Heath (1 mile south-west), Cross (2 miles south-east), Little Overton (2 miles north) and Elson (2 miles south). We also work in nearby towns such as Oswestry (8 miles south-west), Whitchurch (10 miles east), Wem (10 miles south-east), Ellesmere (3 miles south-east), Gobowen (6 miles south-west) and St Martins (4 miles south-west).

What’s near Knolton

Around Knolton, we work in homes near Knolton Mission Church, The Maelor School and Trotting Mare pub, among other places. A little further out are Cae Whisken Fieldname (2 miles north) and Penley Community Hospital (2.4 miles east). Open spaces near Knolton include The Mere.

Map of Knolton © OpenStreetMap contributors

What a repair cannot fix

A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:

  • An acrylic bath that flexes badly underfoot
  • Holes rusted through the metal
  • Leaking taps or wastes (a plumber’s job)

Not sure? Send pictures and we will give you a straight answer before booking.

Surfaces we repair

  • Cast iron baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths

Can I fix it myself?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What bath re-enamelling costs

Resurfacing from £350. Prices are worked out job by job. The main factors are:

  • Any earlier repairs that need removing first
  • The material and finish
  • Doing more than one item at once
  • Whether it’s a chip, crack, burn or wear

A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Getting a price from pictures

Two or three clear photos are typically enough. It helps if you send:

  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit
  • A wider photo showing the entire bath

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Signs you need bath re-enamelling in Knolton

The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.

Send us a picture if you notice any of these:

  • A dull, rough surface that won’t come clean
  • Brown or grey marks that do not clean off
  • A coating lifting around the plughole
  • A roll-top that is seen better days

What to look for in a quote

  • How changes to the job are handled
  • How to look after the finish
  • Whether they match the colour on site
  • How soon you can use it again

10 questions to ask before you book

Landlords, agents and businesses in Knolton

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

If you manage property in Knolton, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.

Your questions about bath re-enamelling in Knolton

Can you re-enamel a roll-top bath?

Yes. Inside and out.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. The rest of the house is unaffected.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

How long is the bath unusable?

Usually one day, with the bath ready the following day. Deeply pitted baths may need a second day.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Will the price change on the day?

Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.

Is my repair covered?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

How do I get a price for bath re-enamelling in Knolton?

Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your SY12 postcode.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.