Wrexham · Wales

Bath re-enamelling & resurfacing in Lightwood Green, Wrexham

Our technicians come to Lightwood Green for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • An old resurfacing that is failing
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Lightwood Green

Common problems we fix in Lightwood Green

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.

Typical reasons for a call-out include:

  • Wear marks under the taps
  • A roll-top that is seen better days
  • Several chips and rust patches
  • An old resurfacing that is failing

Comparing quotes

  • Whether they match the colour on site
  • Whether the price covers travel
  • How the room is protected while they work
  • How changes to the job are handled

Our hiring checklist

Bath re-enamelling in Lightwood Green without replacing anything

Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with a period or roll-top bath worth keeping and a coating lifting around the plughole, we can help.

Your repair is guaranteed for a year, as with every job we do.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Lightwood Green (LL13)
Area hub
Wrexham
Guarantee
A year, on every repair
Price
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Updated
23 October 2026

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

What bath re-enamelling costs

Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:

  • How easy the damage is to reach
  • Doing more than one item at once
  • The type of damage
  • How many areas need work

Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

How to get a fixed quote

You can take the pictures on your phone. Just make sure we can see:

  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage
  • Any earlier repairs or coatings
  • A wider photo showing the entire bath

Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Lightwood Green, and we’ll reply with a fixed price.

Honest limits

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Anything hidden under an old coating, until we remove it
  • A poorly supported acrylic bath, until it’s firmed up
  • Steel that has corroded right through

Send us pictures and we will tell you honestly.

What we work on

  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays

Repairs by material

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Landlord and trade work in Lightwood Green

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Fix dripping taps quickly
  • Use washing-up liquid and a soft cloth
  • Get any chip repaired quickly
  • Respect the curing time we give you

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

What happens on the day

We agree an arrival time beforehand. On site, it takes most of the day for most jobs. We leave the room clean.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s usually ready the following day.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Keep pets and children out of the room while we work
  • Ensure the area is dry

Getting a price

The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say right away whether it can be repaired.

Send photos for a quote

Related advice

Lightwood Green questions

How long does re-enamelling last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Will there be fumes?

Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.

What happens once I’ve sent pictures?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.

Are there extra charges for Lightwood Green?

There is no separate call-out charge. Your fixed quote includes everything.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Do you need to take the bath out?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

About Lightwood Green

Lightwood Green is about 6 miles south of Caia Park, in Wrexham. We visit homes and businesses in Lightwood Green and the surrounding area, so you do not need to take anything anywhere. We cover all 115 towns and villages across Wrexham. Our nearest city page is Liverpool, about 31 miles away.

Our repair technicians cover all of the LL13 postcode area and the streets around it. If you are just outside Lightwood Green, we cover Little Overton (1 mile north-west), Owrtyn (1 mile north-west), Knolton (1 mile south), Brynhovah (2 miles north) and Dudleston Heath (3 miles south). Within a short drive, we also cover Wrexham (7 miles north-west), Caia Park (6 miles north), Offa (7 miles north-west), Rhosllannerchrugog (7 miles north-west), Rhosddu (7 miles north-west) and Acton (7 miles north).

Around Lightwood Green

Our customers here include homes close to St Mary's C.I.W. Aided School, The Maelor School and St Mary's Church, among other places. Well-known places in the area include Penley Community Hospital (1.9 miles east) and Cae Whisken Fieldname (1.2 miles north-west). For a walk, there is The Mere.

Map of Lightwood Green © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.