Knowsley · England
Bath re-enamelling & resurfacing in Knowsley
Bath re-enamelling across Knowsley and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
How we handle bath re-enamelling in Knowsley
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with a dull, rough surface that won’t come clean and an old resurfacing that’s failing, we can help, whatever the material.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Knowsley (L34)
- County
- Knowsley
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Knowsley?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- Work done at your home or business
- Rooms protected and left tidy
Take a look at our prices page or guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £350. You’ll know the full cost before you book. We look at:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- How hard the colour is to match
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Getting a price from photos
We price nearly every job from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- A photo taken from further back
- Something in shot to show the size
Send us a photo of the damage and one of the whole item, with your L34 postcode, and we’ll come back with a fixed quote.
What we’re called out for in Knowsley
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Chips and rust in more than one place
- Stains that won’t shift
Before you book anyone
- Whether the price covers travel
- What aftercare is recommended
- How changes to the job are handled
- What protection goes down before work starts
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Landlord and trade work in Knowsley
We are used to working with agents and managing companies. Send the address, photos and access details.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Where we work around Knowsley
Knowsley is about 2 miles east of Croxteth, in Knowsley. Jobs in Knowsley are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover 5 places in Knowsley.
Jobs in L34 are booked in the same way as anywhere else. Whether you live on Sugar Lane, Homer Road and Alder Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Stockbridge Village (1 mile south-west), Gillmoss (2 miles west), Huyton with Roby (2 miles south), Page Moss (2 miles south) and Roby (3 miles south). We also work in nearby towns such as Kirkby (3 miles north-west), Huyton (3 miles south) and Waddicar (4 miles north-west).
What’s near Knowsley
Around Knowsley, we work in homes near Knowsley Village School, Prescot School and The Derby Arms and the streets around them. For rail, the closest station is Roby station, roughly 2.8 miles south. Other landmarks nearby include Alder Hey Children's Hospital (2.9 miles south-west) and Prescot Shopping Centre (2.4 miles south-east).
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the next day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
- Ensure the area is dry
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Read more
Your questions about bath re-enamelling in Knowsley
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Knowsley.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Keeping it looking good
It’s all simple stuff:
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Places near Knowsley
More services for Knowsley
About our accreditations · Every repair comes with a one-year guarantee.
