Essex · England
Bath re-enamelling & resurfacing in Lambourne End, Essex
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Lambourne End. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A coating lifting around the plughole
- Stains that won’t shift
How we handle bath re-enamelling in Lambourne End
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. Whether it’s chips and rust in more than one place and a roll-top that’s seen better days, we can help.
All of our repairs are guaranteed for twelve months in Lambourne End and everywhere else. We return to put right any problem with the work.
- Area
- Lambourne End (RM4)
- Area hub
- Essex
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Lambourne End
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
The most common problems we’re called about are:
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
Comparing quotes
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- Whether a trained technician does the job
Landlords, agents and businesses in Lambourne End
We carry out planned and one-off repairs for housing associations and facilities teams in Essex and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
When a repair is not the answer
Some jobs are not right for a repair, for example:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Also near Lambourne End
Other services in Lambourne End
Questions from Lambourne End
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Essex.
Do you come to Lambourne End?
Yes. We work across the UK and come to Lambourne End and the rest of Essex. Send pictures and we’ll quote, or call 0345 017 0787.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes most of the day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Aftercare tips
So the finish stays in good condition for years:
- Don’t leave a chip unrepaired
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What bath re-enamelling costs
Prices start from £350. We do not charge extra for travel to Lambourne End. The price depends on:
- How hard the colour is to match
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- The material and finish
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- The material, if you know it
- One picture of the entire bath
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Covering Lambourne End
Lambourne End is about 3 miles east of Loughton, in Essex. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Lambourne End is one of 644 towns and villages in Essex where we work. Our jobs stretch from Lambourne End to London (about 14 miles away).
Jobs in RM4 are booked in the same way as anywhere else. That includes homes on Hoe Lane, Manor Road and New Road. Close by, we cover Lambourne (1 mile north), Chigwell Row (1 mile south-west), Abridge (1 mile north-west), Stapleford Abbotts (2 miles east) and Redbridge (2 miles south). Further out, we also cover Basildon (15 miles east), Harlow (10 miles north), Brentwood (7 miles east), Billericay (12 miles east), Loughton (3 miles west) and Waltham Abbey (6 miles north-west).
Around Lambourne End
Typical jobs here are in homes near The Forest Academy, Parish Church of St Mary and All Saints and Chigwell Row Wood and the streets around them. The nearest railway station is Chadwell Heath station, roughly 4.5 miles south of the centre. Other landmarks nearby include Waltham Holy Cross Urban District (2.7 miles south-west) and Claybury Hospital (3.5 miles south-west). Not far away are Hainault Lodge.
About our accreditations · Every repair comes with a one-year guarantee.
