Dudley · England
Bath re-enamelling & resurfacing in Lapal, Dudley
Full bath re-enamelling and resurfacing at your home in Lapal, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- A period or roll-top bath worth keeping
Our work in Lapal
Lapal is about 1 mile east of Halesowen, in Dudley. Our repair technicians come to homes and businesses in Lapal, so you do not need to take anything anywhere. Lapal is one of 63 towns and villages in Dudley we cover. Our jobs stretch from Lapal to Birmingham (6 miles away).
Our visits in B62 and B32 are booked in the same way as anywhere else. Whether you live on John Road, Kent Road and Manor Lane or a nearby road, a technician can come to you. Being close to the M5, Lapal is simple for us to get to. Neighbouring places we cover include Woodgate (1 mile south-east), Quinton (1 mile north-east), Illey (1 mile south), Hurst Green (1 mile north) and Halesowen (1 mile west). Larger places within reach include Dudley (5 miles north-west), Stourbridge (5 miles west), Kingswinford (7 miles north-west), Sedgley (7 miles north-west), Brierley Hill (5 miles west) and Milking Bank (6 miles north-west).
Near you in Lapal
Locally, our jobs take us to homes close to Leasowes High School, Lapal Primary School and Bourne College and the streets around them. Nearby too are Woodgate Valley Country Park (1.1 miles east) and St Peter's (under half a mile north-west). For rail, the closest station is Rowley Regis station, roughly 1.9 miles north. A little further out are Rowley Regis Hospital (2.4 miles north-west) and Weoley (2.4 miles south-east). Open spaces near Lapal include Turners Hill and Edgbaston Pool.
How we handle bath re-enamelling in Lapal
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s enamel that’s lost its shine and feels rough and chips and rust in more than one place, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Lapal (B62, B32)
- Region
- Dudley
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Lapal. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Generally one visit, start to finish
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
Read our pricing and bath cost comparison.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take most of the day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
- Let us know which floor the room is on
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your photos. What matters most is:
- How hard the colour is to match
- The material and finish
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- The material, if you know it
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- One picture of the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Also in Lapal
What a repair cannot fix
A repair is not right for every job, for example:
- A cast iron or steel bath that is cracked right through
- Problems we can’t see until an old finish comes off
- A bath that’s rusted through
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Common problems we fix in Lapal
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Clients usually contact us about:
- A coating lifting around the plughole
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- A coloured bath you want in white
Before booking anyone
- Who will actually do the work
- What preparation is included
- Whether the colour is mixed to match
- A fixed quote, and whether VAT is included
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Do not use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Lapal questions
Can you do more than one item on the same visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Lapal.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
About our accreditations · Every repair comes with a one-year guarantee.
