Herefordshire · England
Bath re-enamelling & resurfacing in Lea, Herefordshire
Bath re-enamelling in and around Lea: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A coating lifting around the plughole
Bath re-enamelling in Lea without replacing anything
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the following day. We regularly repair acrylic baths, pressed steel baths and basins & shower trays, and people most often call us about staining under the taps and around the waste and a coloured bath you want in white.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Location
- Lea (HR9)
- Area hub
- Herefordshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Lea
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Landlord and trade work in Lea
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
What affects the price in Lea
Resurfacing from £350. We charge the same across the UK, including Lea. The price reflects:
- The colour and finish to match
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Two or three clear photos are normally enough. Try to include:
- Details of any past repairs
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- A picture taken from further back
Most clients in Lea get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Let us know which floor the room is on
- Clear the area around the damage
- Have a window or extractor fan available
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Towns and villages near Lea
Also in Lea
Lea and nearby
Lea is about 4 miles east of Ross-on-Wye, in Herefordshire. Whether you are in the middle of Lea or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 255 places in Herefordshire. Our nearest city page is Birmingham, about 47 miles away.
Postcode districts we cover here: HR9. Local streets include Knightshill, Lealands Gate and Rudhall View, all of which we cover. We also cover the places around Lea: Luxley (1 mile east), Mitcheldean (2 miles south), Longhope (2 miles south-east), Dursley Cross (2 miles east) and Abenhall (2 miles south). We also work in nearby towns such as Hereford (15 miles north-west), Ross-on-Wye (4 miles west), Ledbury (10 miles north), Redhill (14 miles north-west), Newton Farm (15 miles north-west) and Merrivale (4 miles west).
Near you in Lea
Our customers here include homes close to Lea CofE Primary School, Church of St John the Baptist and The Crown Inn and the streets around them. Nearby you’ll also find Eccleswall Castle (1.2 miles north-west) and Ross on Wye Hospital (4.2 miles west). Green spaces nearby include May Hill and Wigpool.
When to call us in Lea
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- A peeling or bubbling previous coating
Questions to ask before booking
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- How to look after the finish
- Whether they match the colour on site
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When we’d advise against a repair
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- A bath that’s rusted through
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- A fixed quote before you book
Take a look at our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
