Kent · England
Bath re-enamelling & resurfacing in Leigh, Kent
Fixed-price bath re-enamelling in Leigh and the surrounding area, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- Lots of chips and rust spots
Bath re-enamelling at your home in Leigh
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair pressed steel baths, Victorian roll-tops and acrylic baths, and people most often call us about several chips and rust patches and staining under the taps and around the waste.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Leigh (TN11)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
For anyone letting property in or around Leigh, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take the best part of a day, including clearing up.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
How to prepare
- Let us know which floor the room is on
- Make sure the room can be ventilated
- Clear the area around the damage
Ask for a price
Most clients in Leigh get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Nearby places to Leigh
Other services in Leigh
Covering Leigh
Leigh is about 3 miles west of Tonbridge, in Kent. Anywhere in TN11, a technician comes to you. Leigh is one of 922 places in Kent we cover. We work right across the region, from Leigh to London (about 25 miles away).
Jobs in TN11 are booked in the same way as anywhere else. Local streets include High Street, Green View Avenue and The Green, and we cover them all. We also cover the places around Leigh: Lower Haysden (1 mile east), Printstile (2 miles south), Bidborough (2 miles south-east), Tonbridge (3 miles east) and Stockland Green (3 miles south). Larger places within reach include Maidstone (14 miles east), Sevenoaks (6 miles north), Royal Tunbridge Wells (5 miles south-east), Swanley (14 miles north), Kings Hill (10 miles north-east) and Foley Park (15 miles north-east).
What’s near Leigh
In Leigh, that means homes near St Mary's Church, The Judd School and Fleur De Lis Cottages Fleur De Lis Public House and the streets around them. Other local landmarks include Leigh Primary School (under half a mile north-west) and Haysden Country Park (1.3 miles east). There is a railway station in Leigh itself: Leigh (Kent) station. Other landmarks nearby include Tonbridge Cottage Hospital (2.7 miles south-east) and The Milne Museum (2.4 miles east). For a walk, there’s Tudeley Woods RSPB reserve and Barden Lake.
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- One visit for most repairs
- Colours mixed by hand to suit your surface
- We’ll tell you if it’s not worth repairing
- Fixed prices from your pictures
Take a look at our pricing or resurfacing vs replacement cost guide.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
Aftercare tips
So the finish stays in good condition:
- Get any chip repaired quickly
- Fix dripping taps quickly
- Do not leave bottles, razors or sponges standing on the surface
- Never use suction bath mats
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Leigh: your questions answered
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Signs you need bath re-enamelling in Leigh
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Keep an eye out for any of the following:
- Chips and rust in more than one place
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Before you book anyone
- Whether the colour is mixed to match
- How long it needs to cure
- Whether the price covers travel
- Who will actually do the work
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- The material
- The colour and finish to match
- Doing more than one item at once
- Access to the area
Our prices are the same across the UK, so there’s no premium for Leigh. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- Any earlier repairs or coatings
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
