Lincolnshire · England
Bath re-enamelling & resurfacing in Lenton, Lincolnshire
Bath re-enamelling for Lenton, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- An old resurfacing that’s failing
- Brown or grey marks that do not clean off
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so these are the limits:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Bath re-enamelling in Lenton, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the day after. We’re frequently asked to fix brown or grey marks that don’t clean off and worn patches where water runs and sits, across Victorian roll-tops, acrylic baths and pressed steel baths.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Location
- Lenton (NG33)
- Area hub
- Lincolnshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and the room is left clean and tidy.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Make sure the room can be ventilated
How to get a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- Whether we combine several jobs
- Access to the area
- Any earlier repairs that need removing first
- The colour and finish to match
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Any details about the material
- Any earlier repairs or coatings
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Other services in Lenton
Lenton and nearby
Lenton is about 8 miles north-west of Bourne, in Lincolnshire. Anywhere in NG33, we carry out the work at your property. We cover 732 places in Lincolnshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 65 miles away.
Postcode districts we cover here: NG33. Close by, we cover Irnham (2 miles south), Pickworth (2 miles north-east), Folkingham (4 miles north-east), Kirkby Underwood (4 miles south-east) and Elsthorpe (4 miles south-east). We also work in nearby towns such as Grantham (8 miles north-west), Spalding (14 miles east), Stamford (14 miles south), Sleaford (10 miles north), Bourne (8 miles south-east) and Austerby (8 miles south-east).
Near you in Lenton
Our customers here include homes close to Ingoldsby Academy and Church of St Peter. Well-known places in the area include Folkingham Castle (3.7 miles north-east).
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
When to call us in Lenton
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted:
- Brown or grey marks that don’t clean off
- An outdated colour you’d like to change
- Thin, worn enamel in places
- Chips and rust in more than one place
Comparing quotes
- Whether a trained technician does the job
- How the colour is matched
- How soon you can use it again
- If travel is included in the price
How to look after the repair
Nothing complicated is needed:
- Store bottles off the bath
- Wash away dyes and oils after use
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Common questions in Lenton
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you come to Lenton?
Yes. We work across the UK and come to Lenton and the rest of Lincolnshire. Send photos and we will quote, or call 0345 017 0787.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Lenton.
How do I get a price for bath re-enamelling in Lenton?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
