Lincolnshire · England
Bath re-enamelling & resurfacing in Pickworth, Lincolnshire
Bath re-enamelling across Pickworth and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coloured bath you want in white
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow the best part of a day from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Open a window if you can
- Let the surface dry out before the visit
- Let us know about parking or access
Ask for a price
If you’re in Pickworth and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
How we handle bath re-enamelling in Pickworth
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you’re dealing with an old resurfacing that’s failing and a period or roll-top bath worth keeping, we can typically put it right, on acrylic baths, basins & shower trays and pressed steel baths alike.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Pickworth (NG34)
- County
- Lincolnshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We work for landlords, letting agents and housing providers in Pickworth as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Do you need bath re-enamelling in Pickworth?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
People generally call us after spotting one of these:
- An outdated colour you’d like to change
- Wear marks under the taps
- Brown or grey marks that don’t clean off
- A roll-top that’s seen better days
Before you book anyone
- The length of the guarantee and what it covers
- Whether the price covers travel
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
Also near Pickworth
Other services in Pickworth
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How many areas need work
- The material and finish
- Unusual colours or finishes
- Whether we combine several jobs
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Getting a price from photos
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
About Pickworth
Pickworth is about 7 miles south of Sleaford, in Lincolnshire. Clients in Pickworth get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Pickworth is one of 732 places in Lincolnshire where we work. Our nearest city page is Birmingham, about 67 miles away.
Our technicians cover all of the NG34 postcode area. From Village Street, Church Lane and Shepton Lane or anywhere nearby, we can come to you. Close by, we cover Folkingham (2 miles east), Lenton (2 miles south-west), Irnham (4 miles south), Kirkby Underwood (4 miles south-east) and Stainfield (6 miles south). Within a short drive, we also cover Grantham (8 miles west), Spalding (14 miles south-east), Sleaford (7 miles north), Bourne (9 miles south), Austerby (9 miles south) and Pinchbeck (13 miles south-east).
Around Pickworth
Around Pickworth, we work in homes near Church of St Andrew, among other places. Further afield, we also cover the area around Folkingham Castle (2 miles east).
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly.
What we work on
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Keeping it looking good
Once the work has cured, treat it gently:
- Wash away dyes and oils after use
- Have chips seen to early
- Store bottles off the bath
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Pickworth: your questions answered
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
What happens once I’ve sent pictures?
We come back with a fixed price, plus dates. You’re under no obligation.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
