Fife · Scotland
Bath re-enamelling & resurfacing in Leven, Fife
Bath re-enamelling for Leven, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- A coating lifting around the plughole
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About our bath re-enamelling in Leven
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. We are often asked to fix a dull, rough surface that won’t come clean and a roll-top that’s seen better days, on basins & shower trays, pressed steel baths and Victorian roll-tops.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Leven (KY8)
- Region
- Fife
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Leven
Other services in Leven
Repair or replace in Leven?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- We come to you, anywhere in the UK
- Most jobs done in one visit
- Free fixed quotes from pictures
- Rooms protected and left tidy
See our full price list and resurfacing vs replacement cost guide.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
When to call us in Leven
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
It’s worth getting a quote if you see:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- An old resurfacing that is failing
What to look for in a quote
- Whether the price covers travel
- What happens if the damage is worse than the pictures show
- How your room will be protected
- Who turns up on the day
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes most of the day. We clean up when we’re done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep children and pets away from the room on the day
- Open a window if you can
- Tell us if there are stairs or a lift
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
When we’d advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- A bath split right through the body
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Our work in Leven
Leven is about 7 miles east of Glenrothes, in Fife. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Leven is one of 133 towns and villages in Fife where we work. Our nearest city page is Edinburgh, about 19 miles away.
Our technicians cover all of the KY8 postcode area. From Station Road, High Street and Church Road or a nearby road, we can come to you. Main roads around Leven include the A915 and A955, so getting to you is simple. If you’re just outside Leven, we cover Methil (1 mile south-west), Windygates (2 miles west), Buckhaven (2 miles south-west), Cameron Bridge (2 miles south-west) and Milton of Balgonie (4 miles west). We also work in nearby towns such as Kirkcaldy (8 miles south-west), Glenrothes (7 miles west), St Andrews (12 miles north-east), Cowdenbeath (15 miles south-west), Dysart (7 miles south-west) and Cupar (8 miles north). Leven is among the bigger towns we cover in Fife.
Around Leven
Typical jobs here are in homes near The Millfield pub, Kirkland High School and Community College and Scoonie Parish Church and the streets around them. For rail, the closest station is Leven station, roughly 0.5 miles south. Other landmarks nearby include Cameron Hospital (2.3 miles west) and Scottish Witch Trial Museum (within half a mile south-east). For a walk, there is Largo Law.
What affects the price in Leven
Prices start from £350. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- The material
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
Our prices are the same across the UK, so there’s no premium for Leven. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- Where you are, by postcode
- Details of any past repairs
- A photo taken from further back
- A coin or ruler next to the damage for scale
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
FAQs for Leven
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
Can you quote from pictures?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
About our accreditations · Every repair comes with a one-year guarantee.
