Kirklees · England
Bath re-enamelling & resurfacing in Linfit, Kirklees
Bath re-enamelling across Linfit and nearby, normally in one visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
About our bath re-enamelling in Linfit
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We work on basins & shower trays, Victorian roll-tops and acrylic baths, and the jobs we see most are staining under the taps and around the waste and lots of chips and rust spots.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Linfit (HD8)
- County
- Kirklees
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We work for landlords, letting agents and housing providers in Linfit as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that’s rusted through
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Linfit
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Keeping it looking good
Aftercare is simple:
- Fix dripping taps quickly
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
Dry the bath after use if possible, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
When to call us in Linfit
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
Signs it’s time to call us include:
- A coating lifting around the plughole
- Thin, worn enamel in places
- A bath in a colour that no longer suits
- A roll-top that’s seen better days
Before booking anyone
- Who will actually do the work
- How long it needs to cure
- The length of the guarantee and what it covers
- How the colour is matched
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes most of the day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
- Tell us about parking, stairs or access
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Related advice
Our work in Linfit
Linfit is about 4 miles south of Mirfield, in Kirklees. Whether you are in the middle of Linfit or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our technicians cover all 189 towns and villages in Kirklees, from the larger towns to small villages. Our jobs stretch from Linfit to Leeds (about 14 miles away).
Postcode districts we cover here: HD8. We also cover the places around Linfit: Flockton Moor (1 mile north-east), Common Side (1 mile south), Cross Roads (1 mile east), Roydhouse (1 mile south) and Grange Moor (1 mile north-east). Within a short drive, we also cover Huddersfield (5 miles west), Dewsbury (5 miles north-east), Batley (7 miles north), Mirfield (4 miles north), Liversedge (6 miles north) and Cleckheaton (7 miles north).
What’s near Linfit
Our customers here include homes close to Shelley College, Cinnamon Lounge pub and Church of St John the Evangelist. For rail, the closest station is Shepley station, about 2.5 miles south of the centre. Nearby you will also find Cumberworth Half (2.9 miles south) and Storthes Hall Hospital (2 miles south-west). Not far away are Castle Hill.
What else we do in Linfit
Questions from Linfit
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Do you cover Linfit?
Yes, we do. We send a technician to Linfit for every job, with no extra charge for travel.
What bath re-enamelling costs
Prices start from £350. There is no charge for travel to Linfit. The price depends on:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- How hard the colour is to match
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
You can take the pictures on your phone. Make sure they show:
- Natural light rather than flash
- Any earlier repairs or coatings
- One picture of the whole bath
- Your postcode, so we can check dates
If you’re in Linfit and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
