Northamptonshire · England
Bath re-enamelling & resurfacing in Little Brington, Northamptonshire
Problem with your bath in Little Brington? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Landlord and trade work in Little Brington
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Bath re-enamelling in Little Brington without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you are dealing with worn patches where water runs and sits and an outdated colour you’d like to change, we can typically put it right, on Victorian roll-tops, pressed steel baths and acrylic baths alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Where
- Little Brington (NN7)
- County
- Northamptonshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
We work cleanly and quietly. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Little Brington and nearby
Little Brington is about 6 miles east of Daventry, in Northamptonshire. Wherever you are in the NN7 postcode area, a technician comes to you. We cover all 364 towns and villages across Northamptonshire, from the larger towns to small villages. Our jobs stretch from Little Brington to Birmingham (about 39 miles away).
Postcode districts we cover here: NN7. Jobs here include addresses on Main Street, Folly Lane and Blacksmiths Lane and the roads around them. Other places close to Little Brington include Great Brington (1 mile north-east), Whilton (2 miles west), Flore (2 miles south-west), Upper Heyford (3 miles south) and Stowehill (3 miles south). We also work in nearby towns such as Northampton (6 miles east), Wellingborough (14 miles east), Daventry (6 miles west), Market Harborough (15 miles north), Towcester (10 miles south) and Desborough (15 miles north-east).
What’s near Little Brington
Locally, our jobs take us to homes close to Brington Primary School and St Johns Church Tower and the streets around them. The nearest railway station is Long Buckby station, about 2.9 miles north-west. Nearby you’ll also find Long Buckby (3.2 miles north-west) and Long Buckby Museum (3.1 miles north-west). Green spaces nearby include Bugbrooke Meadows and Borough Hill.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Signs you need bath re-enamelling in Little Brington
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
It’s worth getting a quote if you see:
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
- Wear marks under the taps
- Several chips and rust patches
Questions to ask before you book
- Is the price fixed, and does it include VAT?
- When it can be used again
- Whether the colour is mixed to match
- If travel is included in the price
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, with the bath back in use the following day. Our bath re-enamelling starts from £350. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Little Brington customers choose us
- One-year guarantee on every repair
- A fixed quote before booking
- Same prices wherever you are
- We’ll tell you if it’s not worth repairing
Read our pricing or resurfacing vs replacement cost guide.
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Also near Little Brington
Other services in Little Brington
Questions from Little Brington
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you work in Little Brington?
We do. We send a technician to Little Brington for every job, and the price is the same as everywhere else.
How much does bath re-enamelling cost in Little Brington?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
How long is the bath unusable?
Generally one day, with the bath ready the next day. A badly pitted bath can need a second day.
About our accreditations · Every repair comes with a one-year guarantee.
