Staffordshire · England
Bath re-enamelling & resurfacing in Little Heath, Staffordshire
Full bath re-enamelling and resurfacing in Little Heath, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath in a colour that no longer suits
Bath re-enamelling at your home in Little Heath
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s a roll-top that’s seen better days and thin, worn enamel in places, we can typically put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Little Heath (ST18)
- Area hub
- Staffordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Your questions about bath re-enamelling in Little Heath
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Which areas do you work in?
Across the UK, so Little Heath is covered. Prices don’t change with location.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Do you work in Little Heath?
Yes, we do. We send a technician to Little Heath for every job, with no extra charge for travel.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Signs you need bath re-enamelling in Little Heath
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Most people get in touch when they notice something like this:
- Thin, worn enamel in places
- An outdated colour you’d like to change
- A roll-top that’s seen better days
- An old resurfacing that’s failing
What your quote should include
- How to care for the finish
- How changes to the job are handled
- How your room will be protected
- If travel is included in the price
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Little Heath. The price depends on:
- How hard the colour is to match
- The type of damage
- How many items we do on one visit
- What the surface is made of
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
You can take the photos on your phone. Ensure they show:
- Any details about the material
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Most clients in Little Heath get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Why us?
- Colours mixed by hand to suit your surface
- One visit for most repairs
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
Take a look at our pricing or resurfacing vs replacement cost guide.
When we’d advise against a repair
A repair isn’t right for every job, including:
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Little Heath and the surrounding area
Little Heath is about 4 miles south of Stafford, in Staffordshire. Whether you’re in the middle of Little Heath or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 512 places in Staffordshire. Our jobs stretch from Little Heath to Birmingham (about 22 miles away).
Every address in ST18 is within our area. We also cover the places around Little Heath: Coppenhall (1 mile north-east), Bradley (1 mile west), Dunston (2 miles east), Hyde Lea (2 miles north) and Longridge (2 miles south-east). We also work in nearby towns such as Stafford (4 miles north), Cannock (7 miles south-east), Lichfield (14 miles east), Rugeley (9 miles east), Burntwood (11 miles south-east) and Stone (10 miles north).
Landmarks near Little Heath
Around Little Heath, we work in homes near Levedale Mission Church and Stafford Manor High School and the streets around them. Little Heath’s nearest station is Penkridge station, roughly 2.4 miles south-east of the centre. Nearby you’ll also find The Staffordshire Police Museum (3.6 miles north-east) and Stafford Castle (3 miles north). Green spaces nearby include Radford Meadows.
Also near Little Heath
More services for Little Heath
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Wash away dyes and oils after use
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the day after.
How to prepare
- Keep pets and children out of the room while we work
- Clear the area around the damage
- Tell us about any previous repairs or coatings
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
