Staffordshire · England

Bath re-enamelling & resurfacing in Stone, Staffordshire

Problem with your bath in Stone? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Stone homes

Bath re-enamelling in Stone, done in place

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Whether it’s a coloured bath you want in white and a roll-top that’s seen better days, we can help.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Stone (ST15)
Area hub
Staffordshire
Guarantee
12 months on all our work
Quotes
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

Landlords, agents and businesses in Stone

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Repair or replace: which is better?

A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Stone. The job itself decides the price: the material, the amount of damage and how many items.

Why us?

  • Every repair guaranteed for a year
  • Work done at your home or business
  • CHAS and Constructionline accredited
  • Generally one visit, start to finish

Take a look at our full price list and bath cost comparison.

When to call us in Stone

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Send us a picture if you notice any of these:

  • Worn patches where water runs and sits
  • A bath in a colour that no longer suits
  • Chips and rust in more than one place
  • Enamel that is lost its shine and feels rough

Before booking anyone

  • When it can be used again
  • How the colour is matched
  • Who will actually do the work
  • If travel is included in the price

Choosing a repair company

FAQs for Stone

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

It’s been repaired before. Can you still fix it?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

How long is the bath unusable?

One day for most baths and can be used the day after. We give you timings with the quote.

Does the bath have to be removed?

Not at all. Everything is done in your bathroom, with the room masked and ventilated.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

What bath re-enamelling costs

Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:

  • The material
  • How many items we do on one visit
  • The type of damage
  • How easy the damage is to reach

Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.

Send pictures for a quote

Two or three clear pictures are normally enough. It helps if you send:

  • A coin or ruler next to the damage for scale
  • A wider photo showing the entire bath
  • What it’s made of, if you know
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Plumbing leaks, which need a plumber
  • A cast iron or steel bath that is cracked right through
  • A poorly supported acrylic bath, until it’s firmed up

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Stone

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths

What happens on the day

Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day. We leave the room clean.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Point us to the nearest place to park
  • Let the surface dry out before the visit
  • Let us know if it has been repaired before

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Get a fixed price

Related advice

Covering Stone

Stone is about 6 miles north of Stafford, in Staffordshire. From the centre of Stone to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Stone is one of 512 places in Staffordshire we cover. Our jobs stretch from Stone to Birmingham (about 31 miles away).

Our visits in ST15 are booked in the same way as anywhere else. Whether you live on High Street, Station Road and Queen's Square or anywhere nearby, we can come to you. With the A34 and A520 close by, Stone is simple for us to get to. Neighbouring places we cover include Little Stoke (1 mile south-east), Aston-by-Stone (1 mile south-east), Cold Norton (2 miles south-west), Yarnfield (2 miles west) and Norton Bridge (3 miles south-west). We also work in nearby towns such as Stafford (6 miles south), Newcastle-under-Lyme (9 miles north-west), Cannock (15 miles south), Longton (6 miles north), Rugeley (13 miles south-east) and Leek (15 miles north). As one of the bigger places in Staffordshire, Stone is somewhere we visit frequently.

Near you in Stone

In Stone, that means homes near The Star pub, Church of St Michael and Alleyne's Academy and the streets around them. The closest station to Stone is Stone station, about 0.9 miles north-west. A little further out are V&A Wedgwood Collection (3.9 miles north). The countryside around Stone includes Hem Heath Woods.

Map of Stone © OpenStreetMap contributors

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.