Oxfordshire · England
Bath re-enamelling & resurfacing in Little Tew, Oxfordshire
We travel to Little Tew for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
What happens on the day
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for the best part of a day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Advice
Bath re-enamelling at your home in Little Tew
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a period or roll-top bath worth keeping and a coating lifting around the plughole, we can help, whatever the material.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Area
- Little Tew (OX7)
- Area hub
- Oxfordshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Little Tew
More services for Little Tew
Landlord and trade work in Little Tew
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Little Tew as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Little Tew and nearby
Little Tew is about 9 miles south-west of Banbury, in Oxfordshire. Wherever you are in the OX7 postcode area, we come to you. We work in all 443 towns and villages across Oxfordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 40 miles away.
Here we cover the OX7 postcode area. That includes homes on Water Lane and Enstone Road and the roads around them. Neighbouring places we cover include Great Tew (1 mile north-east), Swerford (2 miles north), Church Enstone (2 miles south), Enstone (3 miles south) and Wigginton (3 miles north). We also work in nearby towns such as Banbury (9 miles north-east), Bicester (13 miles east), Witney (12 miles south), Carterton (14 miles south-west), Kidlington (11 miles south-east) and Bure Park (13 miles east).
What’s near Little Tew
Typical jobs here are in homes near Church of St John the Evangelist, Great Tew County Primary School and The Falkland Arms Public House, among other places. Well-known places in the area include Old Forge Museum (Great Tew) (0.9 miles north-east). Open spaces near Little Tew include Woodford Bottom and Lamb's Pool.
What affects the price in Little Tew
Resurfacing from £350. You’ll know the full cost before you book. We look at:
- What the surface is made of
- The type of damage
- Where the damage is and how we get to it
- Whether we combine several jobs
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
Before you send photos, a few simple things make all the difference:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- A picture taken from further back
- A coin beside the damage so we can judge size
For a price in Little Tew, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Common questions in Little Tew
What areas do you cover?
All of Oxfordshire, and the rest of the UK. Travel is included in the price.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What we are called out for in Little Tew
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Most people get in touch after spotting one of these:
- Worn patches where water runs and sits
- A coloured bath you want in white
- A coating lifting around the plughole
- Several chips and rust patches
Before booking anyone
- How the room is protected while they work
- Aftercare advice
- What preparation is included
- Who will actually do the work
About our accreditations · Every repair comes with a one-year guarantee.
