North Yorkshire · England

Bath Re-enamelling in Littlebeck

Bath re-enamelling in Littlebeck without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Littlebeck

Bath re-enamelling in Littlebeck, done in place

A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our technicians work on pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are several chips and rust patches and a bath in a colour that no longer suits.

A one-year guarantee comes as standard.

Stained basin resurfaced to clean white (before and after)
Area
Littlebeck (YO22)
County
North Yorkshire
Cover
A year, on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

How to look after the repair

A little care keeps the finish looking good. Our advice:

  • Wipe the bath dry after use in hard water areas
  • Store bottles off the bath
  • Leave the bath for the full curing time before using it
  • Use washing-up liquid and a soft cloth

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.

The process

We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Keep pets and children out of the room while we work
  • Move bottles, mats and clutter away from the area

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Get a fixed price

Read more

Landlord and trade work in Littlebeck

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Signs you need bath re-enamelling in Littlebeck

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

Get in touch if you’ve noticed any of these:

  • A dull, rough surface that won’t come clean
  • Lots of chips and rust spots
  • Brown or grey marks that do not clean off
  • A coating lifting around the plughole

What your quote should include

  • Whether there are any call-out or travel charges
  • The length of the guarantee and what it covers
  • What prep work is covered
  • Aftercare advice

10 questions to ask before booking

What we cannot put right

In fairness, some problems need a different fix:

  • An acrylic bath that flexes badly underfoot
  • A bath that’s rusted through
  • Leaks from fittings rather than the bath

Send us photos and we will tell you honestly.

Materials we work on in Littlebeck

  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths

What bath re-enamelling costs

Resurfacing from £350. You won’t pay by the hour. The price is based on:

  • The material
  • The colour and finish to match
  • How many items we do on one visit
  • Any earlier repairs that need removing first

The price reflects the work involved, not your postcode. You’ll see the full price before booking.

How to get a fixed price

When you take your photos, these tips help us give you a firm price:

  • Your postcode, so we can check dates
  • A photo taken from further back
  • Any earlier repairs or coatings
  • Something in shot to show the size

Send us a picture of the damage and a wider shot of the entire item, and tell us you’re in Littlebeck, and we will come back with a fixed quote.

Our work in Littlebeck

Littlebeck is about 4 miles south of Whitby, in North Yorkshire. We travel to clients in Littlebeck and the surrounding area, so nothing has to leave your home. We cover all 626 towns and villages in North Yorkshire. Our jobs stretch from Littlebeck to Newcastle upon Tyne (about 55 miles away).

All of YO22 is covered. We also cover the places around Littlebeck: Eskdaleside (1 mile north-west), Iburndale (1 mile north), Ugglebarnby (1 mile north), Sleights (2 miles north) and Sneaton (2 miles north-east). We also work in nearby towns such as Scarborough (14 miles south-east), Whitby (4 miles north), Falsgrave (14 miles south-east), Pickering (14 miles south), Northstead (14 miles south-east) and Newby (13 miles south-east).

What’s near Littlebeck

Littlebeck’s nearest station is Sleights station, roughly 2 miles north of the centre. Well-known places in the area include Whitby Hospital (3.7 miles north) and Sneaton Castle (3.5 miles north).

Map of Littlebeck © OpenStreetMap contributors

Common questions in Littlebeck

Will there be fumes?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

What does bath re-enamelling cost?

Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your YO22 postcode.

Do you cover the entire of North Yorkshire?

Across the UK, so Littlebeck is covered. Our prices are the same everywhere.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Do the materials smell?

Expect a mild smell while we are working that clears as it cures.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

Is there a call-out fee?

There’s no separate call-out charge. The fixed price covers the visit and the work.

What happens next?

You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Repairs by material

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.