Devon · England
Bath Re-enamelling in Littlehempston
Bath re-enamelling in Littlehempston without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
Bath re-enamelling in Littlehempston without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s an original cast iron bath that needs restoring and brown or grey marks that don’t clean off, we can help, on Victorian roll-tops, pressed steel baths and acrylic baths alike.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Littlehempston (TQ9)
- Region
- Devon
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Covering Littlehempston
Littlehempston is about 5 miles west of Paignton, in Devon. From the centre of Littlehempston to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 586 places in Devon.
Our visits in TQ9 work the same way as everywhere else we cover. We also cover the places around Littlehempston: Totnes (2 miles south), Bridgetown (2 miles south), Broadhempston (2 miles north), Combe Fishacre (2 miles north-east) and Torbryan (2 miles north). Further out, we also cover Newton Abbot (6 miles north-east), Teignmouth (10 miles north-east), Kingsteignton (8 miles north-east), Ivybridge (12 miles west), Dawlish (13 miles north-east) and Bovey Tracey (9 miles north).
Landmarks near Littlehempston
In Littlehempston, that means homes near Tally Ho pub, Church of St John the Baptist and Dartington Hall School, among other places. The closest station to Littlehempston is Totnes station, roughly 1.4 miles south. Further afield, we also cover the area around Totnes Community Hospital (1.5 miles south) and Berry Pomeroy Castle (1.8 miles east). Green spaces nearby include Orley Common.
Your questions about bath re-enamelling in Littlehempston
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Are there extra charges for Littlehempston?
We do not add a call-out fee. Your fixed quote includes everything.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Is repairing better than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Nearby places to Littlehempston
Other services in Littlehempston
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:
- What the surface is made of
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- What kind of damage it is
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Natural light rather than flash
- Something in shot to show the size
- One picture of the whole bath
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Read more
Should you replace it?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why us?
- Colour-matched on site
- Same prices wherever you are
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
Take a look at our pricing or resurfacing vs replacement cost guide.
What we cannot put right
A repair isn’t always the answer, and we’d rather say so up front. Repairs will not solve:
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly before booking.
Materials we work on in Littlehempston
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
How to look after the repair
It’s all simple stuff:
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
About our accreditations · Every repair comes with a one-year guarantee.
