Surrey · England

Bath re-enamelling & resurfacing in Littleton Common, Surrey

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Littleton Common. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Littleton Common?

Prices and what affects them

Prices start from £350. There’s no area surcharge for Littleton Common. The price reflects:

  • What the surface is made of
  • Any earlier repairs that need removing first
  • The type of damage
  • Unusual colours or finishes

A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

How to get a fixed price

Most quotes are done from pictures alone. To help us price it:

  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit
  • A wider photo showing the whole bath
  • A coin beside the damage so we can judge size

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Bath re-enamelling in Littleton Common, done in place

A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We work on basins & shower trays, acrylic baths and pressed steel baths, and people most often call us about an outdated colour you’d like to change and a coating lifting around the plughole.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.

Area
Littleton Common (TW15, TW17)
County
Surrey
Warranty
One year on every repair
Price
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Keeping it looking good

Once the work has cured, treat it gently:

  • Leave the bath for the full curing time before using it
  • Fix dripping taps quickly
  • Use washing-up liquid and a soft cloth
  • Wipe the bath dry after use in hard water areas

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

When to call us in Littleton Common

Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Look out for any of the following:

  • Staining under the taps and around the waste
  • Wear marks under the taps
  • An old resurfacing that is failing
  • A dull, rough surface that will not come clean

Before booking anyone

  • What aftercare is recommended
  • How long the guarantee is and what it covers
  • How long it needs to cure
  • What prep work is covered

How to compare quotes

What a repair can’t fix

Before booking, it’s worth knowing the limits:

  • Anything hidden under an old coating, until we remove it
  • Plumbing leaks, which need a plumber
  • Steel that has corroded right through

Send us pictures and we will tell you honestly before you book.

Materials we work on in Littleton Common

  • Pressed steel baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths

Repair or replace: which is better?

If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Littleton Common

  • Fixed prices from your pictures
  • Colours mixed by hand to suit your surface
  • Usually one visit, start to finish
  • Everything repaired in place

See our full price list and bath cost comparison.

How it works

There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a full day, including clearing up.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the day after.

Preparing for the visit

  • Ensure the area is dry
  • Mention any earlier repairs or resurfacing
  • Keep a parking space free if you can

Ask for a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.

Get a fixed quote

Advice

For landlords and businesses

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.

Questions from Littleton Common

Do you work for landlords and businesses?

Yes, often. We can quote for several properties together and work between tenancies.

Do you need to take the bath out?

Not at all. Everything is done in your bathroom, with the room protected and ventilated.

What happens if you find more damage?

The price is fixed for what the pictures show. If there’s more, we’ll tell you before starting.

Do you charge for travel?

We don’t add a call-out fee. The fixed price covers the visit and the work.

How long is the bath unusable?

One day for most baths and can be used the day after. We give you timings with the quote.

What happens next?

You’ll get a fixed quote back. There’s no obligation to book.

Does re-enamelling smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

How do I get a price for bath re-enamelling in Littleton Common?

Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Littleton Common and the surrounding area

Littleton Common is about 1 mile south-east of Ashford, in Surrey. Whether you’re in the middle of Littleton Common or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 395 towns and villages across Surrey, from the larger towns to small villages. Our jobs stretch from Littleton Common to London (16 miles away).

All of TW15 and TW17 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Littleton Road, Cambridge Road and Cornerside. Nearby, we also work in Ashford Common (1 mile north-east), Charlton (1 mile south), Hounslow (1 mile north-east), Ashford (1 mile north-west) and Upper Halliford (1 mile south-east). We also work in nearby towns such as Guildford (13 miles south-west), Woking (9 miles south-west), Camberley (14 miles south-west), Epsom (10 miles south-east), Ewell (9 miles south-east) and Egham (4 miles west).

Around Littleton Common

Our customers here include homes close to Sunbury Park, Ashford CofE Primary School and Parish Church of St Matthew. Other local landmarks include The Bishop Wand Church of England School (1.1 miles south-east) and Sunbury Manor School (1.1 miles east). Littleton Common’s nearest station is Upper Halliford station, roughly 0.8 miles south-east. Further afield, we also cover the area around Ashford Hospital (1.8 miles north-west) and Kempton Steam Museum (1.8 miles east). For a walk, there is Kempton Park Reservoirs and Ferris Meadow Lake.

Map of Littleton Common © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.