Worcestershire · England
Bath re-enamelling & resurfacing in Littleworth, Worcestershire
Full bath re-enamelling and resurfacing at your home in Littleworth, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Bath re-enamelling in Littleworth, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the next day. Typical jobs include wear marks under the taps and a bath that stays dull however much you clean it, across Victorian roll-tops, pressed steel baths and acrylic baths.
Every repair is covered by a one-year guarantee, wherever you are in Worcestershire.
- Area
- Littleworth (WR5)
- Region
- Worcestershire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Your questions about bath re-enamelling in Littleworth
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Just add the extra items to your photos and you will get one combined price.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Work for landlords and builders
Landlords, letting agents and housing providers in Littleworth use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Where we work around Littleworth
Littleworth is about 4 miles south-east of Worcester, in Worcestershire. Jobs in Littleworth are booked in like any other job: a fixed quote from photos, then a visit to do the work. Littleworth is one of 376 towns and villages in Worcestershire we cover. We work right across the region, from Littleworth to Birmingham (about 25 miles away).
Every address in WR5 is within our area. From St James Close, Orchard Grove and Wadborough Road or a nearby road, we can come to you. If you are just outside Littleworth, we cover Hatfield (1 mile west), Stoulton (1 mile east), Hawbridge (1 mile south-east), Norton (1 mile north-west) and Pirton (2 miles south). We also work in nearby towns such as Worcester (4 miles north-west), Redditch (14 miles north-east), Bromsgrove (14 miles north), Great Malvern (7 miles west), Droitwich Spa (8 miles north) and Evesham (10 miles south-east).
What’s near Littleworth
Around Littleworth, we work in homes near Norton Juxta Kempsey CofE First School, The Retreat pub and Church of St James. For rail, the closest station is Worcestershire Parkway station, roughly 0.6 miles north-east. A little further out are Worcester Castle (3.4 miles north-west) and Worcestershire Royal Hospital (2.9 miles north). Green spaces nearby include Tiddesley Wood.
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Littleworth. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- The colour and finish to match
- Doing more than one item at once
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
Two or three clear photos are usually enough. Try to include:
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Also in Littleworth
What we are called out for in Littleworth
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
People normally call us after spotting something like this:
- A coating lifting around the plughole
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
What to look for in a quote
- Whether a trained technician does the job
- Aftercare advice
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- One visit for most repairs
- No need to remove anything
See our full price list or bath cost comparison.
How to look after the repair
Nothing complicated is needed:
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day for most jobs. We leave the room clean and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
Ask for a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Related advice
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
