Conwy · Wales
Bath re-enamelling & resurfacing in Llangwstenin, Conwy
Damaged bath in Llangwstenin? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Do not leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Llangwstenin, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Our technicians work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people contact us are a period or roll-top bath worth keeping and worn patches where water runs and sits.
Big or small, it’s backed by a one-year guarantee.
- Where
- Llangwstenin (LL31)
- Area hub
- Conwy
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Llangwstenin
Llangwstenin is about 2 miles north-west of Bae Colwyn, in Conwy. Anywhere in LL31, we come to you. Llangwstenin is one of 75 places in Conwy we cover. You can also see our page for Liverpool, about 35 miles away.
Here we cover the LL31 postcode area. You’ll find streets such as Pen-y-Bont Road and Cystennin Road. If you are just outside Llangwstenin, we cover Glanwydden (1 mile north-west), Bryn Pydew (1 mile south-west), Penrhyn Bay (1 mile north), Rhos-on-Sea (1 mile north-east) and Mochdre (1 mile south). Within a short drive, we also cover Llandudno (3 miles north-west), Old Colwyn (3 miles east), Colwyn Bay (3 miles east), Abergele (8 miles east), Conwy (3 miles south-west) and Cwlach (3 miles north-west).
Around Llangwstenin
Typical jobs here are in homes near Ysgol Glanwydden, Queen's Head pub and Mochdre Infants C.P. School. For rail, the closest station is Colwyn Bay station, about 1.8 miles east. Other landmarks nearby include Marl (2.1 miles south-west) and Ednyfeds Castle (0.6 miles east). Open spaces near Llangwstenin include Conwy RSPB reserve and Bryn Euryn.
What we cannot put right
It helps to know what we can’t do too:
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Llangwstenin
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Nearby places to Llangwstenin
Other services in Llangwstenin
FAQs for Llangwstenin
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Do you cover the whole of Conwy?
The whole UK, including all of Conwy. Just include your postcode and we will confirm dates.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take a full day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Open a window if you can
- Let us know about parking or access
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Prices and what affects them
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- How hard the colour is to match
- What the surface is made of
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed price
Phone pictures are fine. Make sure they show:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A photo taken from further back
Send us pictures of the damage and one of the entire item, with your LL31 postcode, and we will come back with a fixed quote.
Repair or replace in Llangwstenin?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- One price list for the whole UK
- One-year guarantee on every repair
- Work done at your home or business
- Colours mixed by hand to suit your surface
Read our prices page and resurfacing vs replacement cost guide.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
When to call us in Llangwstenin
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, typically first under the taps and around the waste.
Keep an eye out for these signs:
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- A coating lifting around the plughole
Before you book anyone
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- How to look after the finish
- How soon you can use it again
About our accreditations · Every repair comes with a one-year guarantee.
