Conwy · Wales
Bath Re-enamelling in Bae Colwyn
Bath re-enamelling for Bae Colwyn, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Honest limits
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
- A bath split right through the body
Send us photos and we will tell you honestly before booking.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
How we handle bath re-enamelling in Bae Colwyn
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We regularly repair pressed steel baths, cast iron baths and basins & shower trays, and common reasons people get in touch are lots of chips and rust spots and an original cast iron bath that needs restoring.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Area
- Bae Colwyn (LL29, LL28)
- Region
- Conwy
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Bae Colwyn
Also in Bae Colwyn
What we do, step by step
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day. Before leaving, we tell you how long to leave it and how to care for it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About Bae Colwyn
Bae Colwyn (Welsh: Colwyn Bay) is about 29 miles west of Birkenhead, in Conwy. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 75 towns and villages in Conwy. Our nearest city page is Liverpool, about 34 miles away.
Postcode districts we cover here: LL29 and LL28. That includes homes on Station Road, Church Road and Woodland Park and the roads around them. Bae Colwyn sits on or near the A55 and A547, which makes travel easy. We also cover the places around Bae Colwyn: Colwyn Bay (1 mile south), Old Colwyn (1 mile east), Colwyn Bay (1 mile east), Mochdre (1 mile west) and Bryn-y-maen (2 miles south-west). Larger places within reach include Llandudno (5 miles north-west), Abergele (6 miles east), Conwy (4 miles west), Cwlach (5 miles north-west), Deganwy (4 miles west) and Llandudno Junction (3 miles west). Bae Colwyn is among the bigger towns we cover in Conwy.
Around Bae Colwyn
We visit homes around St David's Welsh Church, The Royal pub and St Joseph's R.C. Primary School. There’s a railway station in Bae Colwyn itself: Colwyn Bay station. A little further out are Doll Museum & Model Railway (3.7 miles north-west) and Ednyfeds Castle (1.2 miles north-west). For a walk, there is Conwy RSPB reserve and Rhos on Sea Golf Course Lake.
Repairing versus replacing in Bae Colwyn
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why Bae Colwyn clients choose us
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Colours mixed by hand to suit your surface
See our prices page or guide to resurfacing and replacement costs.
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How many items we do on one visit
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- What it’s made of, if you know
- A photo taken from further back
Send us a photo of the damage and a wider shot of the entire item, with your LL29 postcode, and we’ll reply with a fixed quote.
Landlord and trade work in Bae Colwyn
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Avoid suction-cup mats
- Do not leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
- Have chips seen to early
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What we’re called out for in Bae Colwyn
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
You may need us if you’ve spotted:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
What to look for in a quote
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the photos show
- Is the price fixed, and does it include VAT?
- How long it needs to cure
Your questions about bath re-enamelling in Bae Colwyn
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
What happens once I’ve sent photos?
You’ll get a fixed quote back. You’re under no obligation.
Do the materials smell?
There may be a mild smell during the work.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our accreditations · Every repair comes with a one-year guarantee.
