Ceredigion · Wales
Bath re-enamelling & resurfacing in Llanrhystud, Ceredigion
Bath re-enamelling in and around Llanrhystud: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Stains that won’t shift
Bath re-enamelling in Llanrhystud, done in place
Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on pressed steel baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about a coloured bath you want in white and wear marks under the taps.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Llanrhystud (SY23)
- Area hub
- Ceredigion
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Llanrhystud: your questions answered
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Ceredigion.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do you cover Llanrhystud?
Yes. We cover the whole UK and travel to Llanrhystud and the rest of Ceredigion. Send us photos for a fixed quote, or call 0345 017 0787.
When a repair is not the answer
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Send us photos and we will tell you honestly.
What we work on
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Covering Llanrhystud
Llanrhystud is about 32 miles north of Carmarthen, in Ceredigion. Jobs in Llanrhystud are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Llanrhystud is one of 125 places in Ceredigion we cover.
Our technicians cover all of SY23 and the streets around it. You will find streets such as Heol Islwyn, Church Street and Heol Isfoel. If you are just outside Llanrhystud, we cover Llanddeiniol (2 miles north-east), Llannon (2 miles south-west), Llansantffraid (2 miles south-west), Rhos Haminiog (3 miles south) and Cross Inn (3 miles south). We also work in nearby towns such as Aberystwyth (8 miles north), Trefechan (8 miles north), Aberaeron (7 miles south-west), Lampeter (13 miles south), Penparcau (7 miles north-east) and New Quay (11 miles south-west).
Local landmarks in Llanrhystud
Around Llanrhystud, we work in homes near Church of St Rhystyd, The Black Lion Hotel and Ysgol Gynradd Wirfoddol Myfenydd and the streets around them. A little further out are Tŷ Mawr (within half a mile south-west). For a walk, there’s Cnwc y Barcud and Llyn Eiddwen.
How we price bath re-enamelling
Prices start from £350. You won’t pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- How many items we do on one visit
- The material
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from photos
Two or three clear pictures are generally enough. Try to include:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Don’t let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
- Don’t use the bath until it has fully cured
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repair or replace in Llanrhystud?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing usually wins. Prices start from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why Llanrhystud clients choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- We leave the room as we found it
- We will tell you if it’s not worth repairing
Read our prices page and guide to resurfacing and replacement costs.
The process
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take most of the day, and we’ll keep you posted as we go.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the next day.
Before we arrive
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Tell us about any previous repairs or coatings
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
Places near Llanrhystud
What else we do in Llanrhystud
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
