Highland · Scotland
Bath Re-enamelling in Loans of Tullich
Full bath re-enamelling and resurfacing at your home in Loans of Tullich, with a one-year guarantee on every repair.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
What we’re called out for in Loans of Tullich
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
These are the problems we’re asked about most:
- A roll-top that is seen better days
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
- Worn patches where water runs and sits
Comparing quotes
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- How to look after the finish
- How your room will be protected
Bath re-enamelling in Loans of Tullich without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Common call-outs are for brown or grey marks that don’t clean off and an outdated colour you’d like to change, on acrylic baths, basins & shower trays and Victorian roll-tops.
Big or small, you get the same one-year guarantee.
- Area
- Loans of Tullich (IV20)
- County
- Highland
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
To be straight with you, some problems need a different fix:
- A bath that is rusted through
- A metal bath with a through crack
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Do not use the bath until it has fully cured
- Do not leave a chip unrepaired
- Keep suction mats out of the bath
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why Loans of Tullich customers choose us
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
- One visit for most repairs
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing and guide to resurfacing and replacement costs.
Loans of Tullich and the surrounding area
Loans of Tullich is about 13 miles north of Nairn, in Highland. From the centre of Loans of Tullich to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Loans of Tullich is one of 253 places in Highland we cover.
Postcode districts we cover here: IV20. With the B9166 close by, Loans of Tullich is easy for our technicians to reach. Nearby, we also work in Balintore (1 mile south-east), Shandwick (1 mile south-east), Fearn (1 mile north-west), Hilton of Cadboll (1 mile east) and Hill of Fearn (2 miles north-west). Further out, we also cover Nairn (13 miles south), Tain (6 miles north-west), Alness (13 miles west), Dornoch (9 miles north-west), Invergordon (10 miles south-west) and Fortrose (14 miles south-west). Remote and island addresses take a little more planning, so call us to arrange it.
Landmarks near Loans of Tullich
Typical jobs here are in homes near Fearn, among other places. Loans of Tullich’s nearest station is Fearn station, roughly 2.5 miles north-west of the centre. The countryside around Loans of Tullich includes Loch Eye.
What we do, step by step
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. Allow most of the day, and we will tell you if anything changes.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the day after.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Ensure the room can be ventilated
- Keep a parking space free if you can
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Loans of Tullich questions
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Do you cover the entire of Highland?
All of Highland, and the rest of the UK. There is no extra charge for travel.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
What happens next?
We come back with a fixed price. There is no obligation to book.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Also near Loans of Tullich
Also in Loans of Tullich
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Prices and what affects them
Prices start from £350. We price every job individually, from your photos. What matters most is:
- The material
- Previous DIY repairs that have to come out
- The colour and finish to match
- The size and number of damaged areas
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Whether it’s been repaired or coated before
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
