Fife · Scotland
Bath Re-enamelling for Lochore homes
Full bath re-enamelling and resurfacing at your home in Lochore, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits

How we handle bath re-enamelling in Lochore
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. Common call-outs are for a peeling or bubbling previous coating and an outdated colour you’d like to change, on basins & shower trays, acrylic baths and pressed steel baths.
Whatever the size of the job, you get the same one-year guarantee in Lochore and across Fife.
- Where
- Lochore (KY5)
- Area hub
- Fife
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026

Aftercare tips
Simple care helps the repair last. Our advice:
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- The colour and finish to match
- Access to the area
- How much damage there is
- Previous DIY repairs that have to come out
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Two or three clear photos are normally enough. It helps if you send:
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- One picture of the whole bath
- Natural light rather than flash
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day for most jobs. We leave the room clean.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Make sure the room can be ventilated
- Point us to the nearest place to park
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Read more
Lochore: your questions answered
Which areas do you work in?
We work UK-wide, and that includes Lochore. Prices do not change with location.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your KY5 postcode.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Lochore and the surrounding area
Lochore is about 6 miles south-west of Glenrothes, in Fife. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Lochore is one of 133 places in Fife we cover. Our jobs stretch from Lochore to Edinburgh (about 15 miles away).
Our repair technicians cover all of the KY5 postcode area and the streets around it. Whether you live on Scott Place, Loch Leven Terrace and Marmion Road or anywhere nearby, a technician can come to you. Nearby, we also work in Crosshill (1 mile south), Ballingry (1 mile north), Glencraig (1 mile south), Lochgelly (2 miles south) and Lumphinnans (3 miles south). Larger places within reach include Dunfermline (7 miles south-west), Kirkcaldy (6 miles east), Glenrothes (6 miles north-east), Leven (13 miles east), Cowdenbeath (4 miles south) and Dysart (8 miles east).
Landmarks near Lochore
Locally, our jobs take us to homes close to Ballingry Parish Church and Lochgelly High School. The closest station to Lochore is Lochgelly station, about 1.6 miles south. Other landmarks nearby include Lochore Castle (0.6 miles south) and Michael Bruce Cottage Museum (3.9 miles north). The countryside around Lochore includes Loch Gelly and Benarty Hill.
Common problems we fix in Lochore
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Look out for any of the following:
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- Stains that will not shift
Comparing quotes
- How long it needs to cure
- How your room will be protected
- Aftercare advice
- How changes to the job are handled
Places near Lochore
Also in Lochore
For landlords and businesses
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Lochore, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
What a repair cannot fix
A repair isn’t right for every job, including:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.

