Suffolk · England
Bath re-enamelling & resurfacing in Lound, Suffolk
Damaged bath in Lound? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
Bath re-enamelling at your home in Lound
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include wear marks under the taps and a dull, rough surface that won’t come clean, on cast iron baths, Victorian roll-tops and pressed steel baths.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Area
- Lound (NR32)
- Area hub
- Suffolk
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Lound questions
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you work in Lound?
Yes. We cover the whole UK and come to Lound and the rest of Suffolk. Send us pictures for a fixed quote, or call 0345 017 0787.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Towns and villages near Lound
What else we do in Lound
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Repairing versus replacing in Lound
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
What you get with us
- Rooms protected and left tidy
- We’ll tell you if it’s not worth repairing
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page and bath cost comparison.
When a repair is not the answer
A repair isn’t right for every job, for example:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
What bath re-enamelling costs
Prices start from £350. We do not charge extra for travel to Lound. The price depends on:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- How easy the damage is to reach
- How much damage there is
A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
How to get a fixed price
It only takes a minute to photograph the damage. Please include:
- A photo taken from further back
- Daylight if possible, and no flash reflection
- The material, if you know it
- Something in shot to show the size
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
What happens on the day
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. It normally takes the best part of a day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Ensure the area is dry
- Keep pets and children out of the room while we work
- Clear the area around the damage
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Advice
Do you need bath re-enamelling in Lound?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
The things customers usually mention when they call include:
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
- Worn patches where water runs and sits
- A roll-top that’s seen better days
Questions to ask before booking
- What aftercare is recommended
- What prep work is covered
- What happens if the damage is worse than the photos show
- Who turns up on the day
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs immediately
- Get any chip repaired quickly
- Avoid suction-cup mats
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Our work in Lound
Lound is about 3 miles south-west of Gorleston-on-Sea, in Suffolk. Our technicians come to homes and businesses in Lound, so you don’t need to take anything anywhere. Our repair technicians cover all 731 towns and villages in Suffolk, from the larger towns to small villages.
Our technicians cover all of the NR32 postcode area. Local streets include The Street and Earth Lane. We also travel to Ashby (1 mile west), Browston Green (2 miles north), Somerleyton (2 miles south-west), Herringfleet (2 miles west) and Fritton (2 miles west). Further out, we also cover Lowestoft (4 miles south), Beccles (8 miles south-west), Bungay (12 miles south-west), Halesworth (15 miles south-west), Carlton Colville (5 miles south) and Kirkley (5 miles south).
Near you in Lound
We visit homes around Church of St John the Baptist, Cliff Park Ormiston Academy and The Village Maid pub, among other places. The closest station to Lound is Somerleyton station, about 2.3 miles south-west. Nearby you’ll also find James Paget Hospital (2.3 miles north-east). Not far away are Lound Lakes and Fritton Lake.
Landlord and trade work in Lound
For anyone letting property in or around Lound, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
