Norfolk · England
Bath re-enamelling & resurfacing in Low Common, Norfolk
Bath re-enamelling for Low Common, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Several chips and rust patches
Bath re-enamelling in Low Common without replacing anything
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Typical jobs include brown or grey marks that don’t clean off and several chips and rust patches, across Victorian roll-tops, basins & shower trays and acrylic baths.
Whatever the size of the job, it’s backed by a one-year guarantee in Low Common and across Norfolk.
- Area
- Low Common (NR14)
- County
- Norfolk
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Low Common and nearby
Low Common is about 8 miles south-east of Norwich, in Norfolk. Our technicians come to clients in Low Common, so nothing has to leave your home. Our technicians cover 797 places in Norfolk.
Our visits in NR14 work the same way as everywhere else we cover. Neighbouring places we cover include Thurton (1 mile south-west), Ashby St Mary (1 mile north), Carleton St Peter (1 mile north-east), Claxton (1 mile north) and Hellington (2 miles north-west). Within a short drive, we also cover Norwich (8 miles north-west), Great Yarmouth (12 miles east), Wymondham (14 miles west), Gorleston-on-Sea (12 miles east), Sprowston (8 miles north-west) and Thorpe St Andrew (7 miles north-west).
What’s near Low Common
Our customers here include homes close to Church of St Peter and Thurton Primary School and the streets around them. Low Common’s nearest station is Buckenham station, roughly 2.7 miles north-east. Further afield, we also cover the area around Strumpshaw Hall Steam Museum (3.2 miles north) and St Andrew's Hospital (5.6 miles north-west). Green spaces nearby include Bargate and Buckenham Marshes RSPB reserve.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Signs you need bath re-enamelling in Low Common
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Get in touch if you’ve noticed:
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
- Wear marks under the taps
- An original cast iron bath that needs restoring
Comparing quotes
- What aftercare is recommended
- How the room is protected while they work
- Whether the price covers travel
- Who turns up on the day
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Access to the area
- The material
- How much damage there is
- Whether old repairs or coatings need taking off
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Quotes from your photos
You can usually get a fixed quote without us visiting. To make it quick:
- What it’s made of, if you know
- Natural light rather than flash
- Whether it’s been repaired or coated before
- One picture of the entire bath
Email us photos of the damage and one of the entire item, and tell us you are in Low Common, and we will come back with a fixed quote.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which typically takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why choose Surface Doctor in Low Common
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
- One visit for most repairs
See our prices page and bath cost comparison.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Aftercare tips
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Your questions about bath re-enamelling in Low Common
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do the materials smell?
Expect a mild smell while we’re working.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Do you cover the whole of Norfolk?
Everywhere in the UK, Low Common included. There’s no extra charge for travel.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Norfolk.
Places near Low Common
Other services in Low Common
About our accreditations · Every repair comes with a one-year guarantee.
