County Durham · England
Bath re-enamelling & resurfacing in Low Etherley, County Durham
Local bath re-enamelling for Low Etherley: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- A bath that stays dull however much you clean it
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- The material and finish
- How many items we do on one visit
- How much damage there is
- How easy the damage is to reach
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- What it’s made of, if you know
- Where you are, by postcode
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Bath re-enamelling at your home in Low Etherley
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Common call-outs are for a coloured bath you want in white and chips and rust in more than one place, on acrylic baths, Victorian roll-tops and basins & shower trays.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Low Etherley (DL14)
- Area hub
- County Durham
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Low Etherley
Other services in Low Etherley
How it works
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. It normally takes a full day, and we will tell you if anything changes.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Honest limits
We’ll always be straight with you, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. We charge the same wherever you are, so there’s no premium for Low Etherley. The job itself decides the price: the material, the amount of damage and how many items.
Why choose Surface Doctor in Low Etherley
- Everything repaired in place
- Most jobs done in one visit
- Repair technicians who travel to you, UK-wide
- Same prices wherever you are
Read our pricing or bath cost comparison.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Stick to gentle, non-abrasive cleaners
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Common questions in Low Etherley
How long does re-enamelling take?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send photos.
Low Etherley and nearby
Low Etherley is about 3 miles west of Bishop Auckland, in County Durham. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 329 towns and villages in County Durham, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 24 miles away.
We work across the DL14 postcode area and the streets around it. That includes homes on Bankwell Drive, Stobarts Court and Witton Way and the roads around them. Other places close to Low Etherley include High Etherley (1 mile south), Toft Hill (1 mile south-west), Phoenix Row (1 mile north), Witton Park (1 mile north-east) and Woodside (1 mile north-east). We also work in nearby towns such as Durham (11 miles north-east), Consett (14 miles north), Newton Aycliffe (7 miles east), Bishop Auckland (3 miles east), Spennymoor (6 miles north-east) and Chester-le-Street (15 miles north-east).
What’s near Low Etherley
Locally, our jobs take us to homes close to St John's School & Sixth Form College - A Catholic Academy, The Sportsman pub and Toft Hill Primary School and the streets around them. The nearest railway station is Bishop Auckland station, about 2.7 miles east of the centre. Well-known places in the area include Bishop Auckland Hospital (2.7 miles east) and Witton Castle (1.2 miles north-west).
Common problems we fix in Low Etherley
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
Signs it’s time to call us include:
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
- A coloured bath you want in white
- Chips and rust in more than one place
Comparing quotes
- Whether a trained technician does the job
- How the colour is matched
- The length of the guarantee and what it covers
- What aftercare is recommended
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
