Dorset · England
Bath Re-enamelling in Lower Coombe
Full bath re-enamelling and resurfacing at your home in Lower Coombe, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that is seen better days
- Stains that will not shift
Covering Lower Coombe
Lower Coombe is about 10 miles north of Blandford Forum, in Dorset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 462 towns and villages in Dorset, from the larger towns to small villages.
Postcode districts we cover here: SP7. We also cover the places around Lower Coombe: Lillies Green (1 mile north-east), Ludwell (1 mile south-east), Birdbush (1 mile east), Donhead St Mary (1 mile north) and Milkwell (1 mile north-east). Larger places within reach include Blandford Forum (10 miles south), Verwood (15 miles south-east), Gillingham (6 miles west), Peacemarsh (7 miles west), Sturminster Newton (9 miles south-west) and Milborne Port (14 miles west).
Landmarks near Lower Coombe
Around Lower Coombe, we work in homes near St Mary's School, Ludwell Community Primary School and Church of St John the Baptist. Lower Coombe’s nearest station is Tisbury station, about 4.5 miles north-east. Other landmarks nearby include Gold Hill Museum (2.6 miles west) and Westminster Memorial Hospital (2.8 miles west). The countryside around Lower Coombe includes Breeze Hill.
How we handle bath re-enamelling in Lower Coombe
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Whether it’s thin, worn enamel in places and a bath that stays dull however much you clean it, we can help.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Lower Coombe (SP7)
- Region
- Dorset
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Towns and villages near Lower Coombe
Also in Lower Coombe
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Lower Coombe. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Lower Coombe clients choose us
- Colour-matched on site
- We come to you, anywhere in the UK
- One price list for the entire UK
- No need to remove anything
Take a look at our pricing or bath cost comparison.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Work for landlords and builders
For anyone letting property in or around Lower Coombe, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
What bath re-enamelling costs
Prices start from £350. We give every job a fixed price from pictures. These are the things that affect it:
- How much damage there is
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- Unusual colours or finishes
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
Send pictures for a quote
Before you send photos, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- The material, if you know it
- One picture of the entire bath
- The postcode, so we can plan the visit
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Your questions about bath re-enamelling in Lower Coombe
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can a failed resurfacing be redone?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will do the rest.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Lower Coombe.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the next day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Read more
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Leave the bath for the full curing time before using it
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
